User
0
1

Showing 1–12 of 16 results

  • 15A 400W MOSFET Trigger Switch Drive Module PWM Re in Pakistan

    Original price was: ₨ 150.Current price is: ₨ 130.

    The MOSFET Trigger Switch Drive Module is of high power MOS trigger switch driver module and control board with a field-effect tube to adjust the electronic switch.

    This MOSFET voltage regulator adopts imported double MOS parallel active output to show lower internal resistance, greater electric current,and power. Hence besides it works at 15A,400W under common temperature. Which satisfies most devices usage and realizes the control of great power devices in a relaxed way.

    What’s more, it can be applied to powerful devices which could be controlled by output terminals like electric motors and light bulbs . To control the speed of the motor and the light of bulbs. Certainly, you can apply it to devices that could input PWM for control like an LED light belt, DC motor, Micropump, and solenoid valves.

  • 16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino

    Original price was: ₨ 1,000.Current price is: ₨ 750.

    This  16-Channel 12-Bit Servo motor driver empowers your robotics and automation projects with unparalleled control. Effortlessly manage up to 16 servos simultaneously using just 2 I2C pins on your microcontroller, freeing up valuable GPIO resources.

  • 2000w 25a Ac50-220v Adjustable Ac Dimmer Ac Heater Controller in Pakistan

    Original price was: ₨ 500.Current price is: ₨ 400.

    • The voltage is 50-220V.
    • The current is 25A.
    • Power is 2000W
    • Its Size is 52*47*27mm/2*1.85*1in Operation
    • Environment Temperature is between -20℃-40℃

  • A4988 Stepper Motor Driver in Pakistan A4988 Stepper Motor Driver in Pakistan

    Original price was: ₨ 300.Current price is: ₨ 280.

    • its supply voltage is 8 to 35V DC.
    • it has 1A current without a heatsink.
    • it gives 2 A current with the heat sink.
    • 3 to 5.5V is logical input.

  • CNC USB MACH3 100Khz Breakout Board 4 Axis Interface Driver Motion Controller

    Original price was: ₨ 3,000.Current price is: ₨ 2,600.

    his 4 Axis CNC USB Controller is designed to be used for notebook and tablets simple configuration and compatibility. The card can run what all other MACH 3 controllers can run and supports the drive shaft and the driven shaft gantry supports automatic leveling and has an output pulse 100 KHz.

  • DRV8825 Stepper Motor Driver With Aluminum Heat Sink

    Original price was: ₨ 550.Current price is: ₨ 450.

    DRV8825 Stepper Motor Driver with Aluminum Heat Sink – High-performance stepper motor driver supporting up to 45V and 2.5A per coil with microstepping (up to 1/32). Compatible with Arduino, CNC, and 3D printer applications. Comes with a heat sink for better cooling.

    Pin Description:

    • VMOT – Motor power supply (8.2V-45V)
    • GND – Ground
    • VCC – Logic power (3.3V-5V)
    • DIR – Direction control
    • STEP – Step pulse input
    • ENABLE – Enable/disable driver
    • MS1, MS2, MS3 – Microstep selection
    • FAULT – Error indicator
    • RESET – Reset driver
    • SLEEP – Low-power mode

  • HW-687 5A Mini DC Motor PWM Speed Controller Module in Pakistan

    Original price was: ₨ 300.Current price is: ₨ 250.

    HW-687 is one easy module for adding speed regulation to your next DC motor-based project. It is a simple pulse-width-modulated speed controller providing smooth control with almost no jerks. There is no soldering involved, so it is perfect for quick prototyping and modeling, especially for those not having easy access to requisite raw materials.

  • Ibt2 Bts7960b Bts7960 43a H-bridge Motor Driver Module For Arduino

    Original price was: ₨ 1,500.Current price is: ₨ 1,200.

    The driver uses high-power driver chip BTS7960 composed of H bridge driver module, with over-temperature over-current protection. BTS7960 H bridge driver circuit, with strong drive and brake effects, the use of 74HC244 chip effectively isolated SCM and motor drive! High current 43A!
    Up to 43A super-current output in extreme conditions Current diagnosis Slope adjustment Dead time is generated Over-temperature, over-voltage, under-voltage, over-current protection Short circuit protection Electrical performance: Model: IBT-2 Input voltage: 6V-27V Maximum current: 43A Input level: 3.3-5V Control method: PWM or level Duty cycle: 0-100 hundred.

  • L293D Motor Driver Shield in Pakistan

    Original price was: ₨ 500.Current price is: ₨ 420.

    L293D Motor Driver Shield – Dual Motor Control for Arduino

    The L293D Motor Driver Shield is a powerful and easy-to-use expansion board for Arduino, allowing control of DC motors, stepper motors, and servos with ease. Featuring L293D H-Bridge ICs, it supports 4 DC motors or 2 stepper motors, with independent speed and direction control. Ideal for robotics, automation, and motorized projects, this shield simplifies motor control while providing reliable performance.

    ✅ Controls up to 4 DC motors or 2 stepper motors
    ✅ Independent speed & direction control
    ✅ Built-in servo connections
    ✅ Perfect for robotics & automation projects

    Package Includes: 1 × L293D Motor Driver Shield

  • L298N Motor Driver Module in Pakistan

    Original price was: ₨ 400.Current price is: ₨ 350.

    • It has a double H-bridge drive chip of L298N.
    • 5V is its logical voltages.
    • Its drive voltages are 5V- 35V.
    • 0 to 36mA is its logical current.
    • Its drive current is 2A for MAX single bridge.
    • Its max power value is 25W.
    • Its dimensions are 43 x 43 x 26mm.
    • Its weight is almost 26g.

  • Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive

    Original price was: ₨ 2,000.Current price is: ₨ 1,650.

    Mach3 Breakout Board 5 Axes CNC Breakout Board with Optical Coupler – A powerful CNC controller board designed for Mach3, supporting up to 5 axes. Features optical coupling for improved signal isolation, providing precise control for stepper motors. Ideal for CNC machines and automation projects

  • Mini 4-Channel Motor Driver Shield Expansion Board L293D Module in Pakistan

    Original price was: ₨ 250.Current price is: ₨ 220.

    • Its name is the mini L293D motor drive expansion board.
    • Its weight is 11.2g.
    • Its size is standard.
    • Its input voltage is DC 4.5 – 25V.
    • 600mA Output Current Capability Per Channel
    • It contains 600mA output current capability per channel.
    • It has 1.2A peak output current per channel.

Filter by price

1
    1
    Your Cart
    L293D Motor Driver Shield in Pakistan
    1 X ₨ 420 = ₨ 420
    Subtotal ₨ 420
    Shipping, taxes, and discounts calculated at checkout.
    View CartContinue ShoppingCheckout₨ 420