Showing 1–12 of 16 results

  • 15A 400W MOSFET Trigger Switch Drive Module PWM Re in Pakistan

    Original price was: ₨ 150.Current price is: ₨ 130.

    The 15A 400W MOSFET Trigger Switch Drive Module is a high-power, fast-switching control board ideal for driving high-current DC loads using PWM signals. It supports up to 15A continuous current and 400W power, making it perfect for motors, LED strips, heating elements, and other inductive/resistive loads. Fully compatible with Arduino, Raspberry Pi, and industrial control systems.

  • 16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino

    Original price was: ₨ 1,000.Current price is: ₨ 750.

    The PCA9685 16-Channel 12-bit PWM Servo Motor Driver is an I2C-controlled module capable of driving 16 PWM outputs with 12-bit resolution (4096 steps) over just 2 I2C pins. Ideal for controlling servo motors, LEDs, and robotic arms with Arduino, Raspberry Pi, or ESP32, making it a perfect choice for multi-axis robotics and IoT automation.

  • 2000W 25A Adjustable AC Dimmer AC Heater Controller

    Original price was: ₨ 500.Current price is: ₨ 400.

    The 2000W 25A Adjustable AC Dimmer is a high-power AC voltage regulator designed to control the brightness, speed, or temperature of AC appliances. Operating on AC 220V, it supports up to 2000W of load and 25A current, making it ideal for heater coils, light dimming, fan speed regulation, and AC motor control in DIY or industrial automation projects.

    • The voltage is 50-220V.
    • The current is 25A.
    • Power is 2000W
    • Its Size is 52*47*27mm/2*1.85*1in Operation
    • Environment Temperature is between -20℃-40℃
  • A4988 Stepper Motor Driver in Pakistan

    Original price was: ₨ 300.Current price is: ₨ 280.

    The A4988 Stepper Motor Driver is a microstepping motor controller capable of driving bipolar stepper motors up to 2A per coil with 1/16 microstepping resolution. Designed for Arduino, RAMPS, and CNC applications, it supports 8V–35V motor voltage and includes current limiting, over-temp, and short-circuit protection—perfect for 3D printers, CNC routers, and robotics projects.

    • its supply voltage is 8 to 35V DC.
    • it has 1A current without a heatsink.
    • it gives 2 A current with the heat sink.
    • 3 to 5.5V is logical input.
  • CNC USB MACH3 100Khz Breakout Board 4 Axis Interface Driver Motion Controller

    Original price was: ₨ 3,000.Current price is: ₨ 2,600.

    The CNC USB MACH3 100KHz Breakout Board is a high-speed, 4-axis motion controller designed for smooth communication between your PC and CNC machine via USB. Supporting up to 100KHz pulse frequency, this interface board is ideal for driving stepper motor drivers like TB6600 and TB6560, with full compatibility with MACH3 CNC software. Ideal for CNC routers, laser engravers, and automated machinery projects.

  • DRV8825 Stepper Motor Driver With Aluminum Heat Sink

    Original price was: ₨ 550.Current price is: ₨ 450.

    The DRV8825 Stepper Motor Driver Module with an aluminum heat sink is a precision microstepping driver capable of handling up to 2.5A per coil (with cooling), supporting 1/32 microstepping, and operating at 8.2V to 45V. Ideal for 3D printers, CNC machines, and robotic arms using Arduino or RAMPS boards.

    Pin Description:

    • VMOT – Motor power supply (8.2V-45V)
    • GND – Ground
    • VCC – Logic power (3.3V-5V)
    • DIR – Direction control
    • STEP – Step pulse input
    • ENABLE – Enable/disable driver
    • MS1, MS2, MS3 – Microstep selection
    • FAULT – Error indicator
    • RESET – Reset driver
    • SLEEP – Low-power mode
  • HW-687 5A Mini DC Motor PWM Speed Controller Module in Pakistan

    Original price was: ₨ 300.Current price is: ₨ 250.

    The HW-687 Mini DC Motor Speed Controller is a compact PWM-based driver that allows smooth and precise control of DC motor speed. Operating from DC 3V–35V with a 5A maximum current, it’s ideal for DIY electronics, robotics, and Arduino-based projects, offering efficient motor control in a small form factor.

  • IBT2 BTS7960B BTS7960 Module In Pakistan

    Original price was: ₨ 1,500.Current price is: ₨ 1,200.

    The IBT-2 BTS7960B Motor Driver Module is a high-power H-bridge motor driver built using dual BTS7960B half-bridge chips, capable of delivering up to 43A continuous current at 5.5V–27V. Perfect for driving high-torque DC motors, electric scooters, robotic arms, and automation projects with Arduino, Raspberry Pi, or other microcontrollers.

  • L293D Motor Driver Shield in Pakistan

    Original price was: ₨ 500.Current price is: ₨ 420.

    L293D Motor Driver Shield – Dual Motor Control for Arduino

    The L293D Motor Driver Shield is a powerful and easy-to-use expansion board for Arduino, allowing control of DC motors, stepper motors, and servos with ease. Featuring L293D H-Bridge ICs, it supports 4 DC motors or 2 stepper motors, with independent speed and direction control. Ideal for robotics, automation, and motorized projects, this shield simplifies motor control while providing reliable performance.

    ✅ Controls up to 4 DC motors or 2 stepper motors
    ✅ Independent speed & direction control
    ✅ Built-in servo connections
    ✅ Perfect for robotics & automation projects

    Package Includes: 1 × L293D Motor Driver Shield

  • L298N Motor Driver Module in Pakistan

    Original price was: ₨ 400.Current price is: ₨ 350.

    • It has a double H-bridge drive chip of L298N.
    • 5V is its logical voltages.
    • Its drive voltages are 5V- 35V.
    • 0 to 36mA is its logical current.
    • Its drive current is 2A for MAX single bridge.
    • Its max power value is 25W.
    • Its dimensions are 43 x 43 x 26mm.
    • Its weight is almost 26g.
  • Mach3 Breakout Board 5 Axes Cnc Breakout Board

    Original price was: ₨ 2,000.Current price is: ₨ 1,650.

    The Mach3 Breakout Board for 5 Axes CNC machines is a parallel port interface board built for seamless integration with Mach3 CNC control software. It allows connection and control of up to 5 stepper motor drivers (X, Y, Z, A, B axes) with stable pulse signal output, isolation protection, and essential input features like limit switches and emergency stops. Perfect for DIY CNC routers, laser cutters, plasma machines, and engraving systems.

  • Mini 4-Channel Motor Driver Shield Expansion Board L293D Module in Pakistan

    Original price was: ₨ 250.Current price is: ₨ 220.

    • Its name is the mini L293D motor drive expansion board.
    • Its weight is 11.2g.
    • Its size is standard.
    • Its input voltage is DC 4.5 – 25V.
    • 600mA Output Current Capability Per Channel
    • It contains 600mA output current capability per channel.
    • It has 1.2A peak output current per channel.
1
1
Your Cart