DT830D Digital Multimeter
The DT830D Digital Multimeter is a practical general-purpose test meter for electronics students, technicians, repair professionals, and DIY users. Its 3½-digit LCD provides a maximum reading of 1999 counts, while the manual range selector allows the user to choose the appropriate measurement range for the job.
The meter supports DC voltage measurement from 200mV up to 1000V, along with AC voltage ranges up to 750V. It also provides DC current measurement, resistance testing up to 2MΩ, diode testing, transistor hFE testing, and an audible continuity function. These features make the DT830D useful for checking electronic components, troubleshooting circuits, testing batteries, and carrying out basic electrical measurements.
The compact ABS housing and straightforward rotary selector make the meter easy to handle in workshops, classrooms, service benches, and field applications. A 9V battery is typically used as the power source, while overload protection helps protect the meter against some measurement errors. Specifications can vary slightly between manufacturers of DT830D-type meters, so users should check the markings on their specific unit before working with high voltages.
Technical Specifications
| Specification | Details |
|---|---|
| Model | DT830D |
| Product Type | Digital Multimeter |
| Display | 3½-Digit LCD |
| Maximum Display | 1999 Counts |
| DC Voltage | 200mV / 2V / 20V / 200V / 1000V |
| AC Voltage | 200V / 750V |
| DC Current | 20µA / 2000µA / 20mA / 200mA / 10A* |
| Resistance | 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Transistor Test | hFE |
| Overload Protection | Yes |
| Power Supply | 1 × 9V Battery |
| Housing | ABS Plastic |
| Operation | Manual Range Selection |
*The available current ranges and protection arrangement can vary among DT830D variants.
Applications
- Electronics repair and troubleshooting
- Measuring DC and AC voltage
- Testing resistors and other passive components
- Diode and transistor testing
- Continuity checking of wires and PCB tracks
- Battery voltage testing
- DIY electronics projects
- Electrical maintenance and basic diagnostics
- Technical education and laboratory work
Precautions
- Always select the correct measurement function and range before testing.
- Never measure voltage while the meter is configured for current measurement.
- Check the test leads and insulation for damage before use.
- Do not exceed the voltage or current rating of the particular DT830D model.
- Disconnect power from a circuit before measuring resistance or continuity.
- Use the correct input terminal for low-current and high-current measurements.
- Replace a blown fuse only with the correct type and rating where applicable.
- Keep the meter dry and away from excessive heat.
- DT830D models vary by manufacturer; verify the meter’s markings and manual before measuring mains or other hazardous voltages.
Related Products
- Digital Multimeters
- Test & Measurement Instruments
- Soldering & Electronics Tools
Reviews
There are no reviews yet.