A4988 Stepper Motor Driver in Pakistan

Original price was: ₨ 300.Current price is: ₨ 280.

The A4988 Stepper Motor Driver is a microstepping motor controller capable of driving bipolar stepper motors up to 2A per coil with 1/16 microstepping resolution. Designed for Arduino, RAMPS, and CNC applications, it supports 8V–35V motor voltage and includes current limiting, over-temp, and short-circuit protection—perfect for 3D printers, CNC routers, and robotics projects.

  • its supply voltage is 8 to 35V DC.
  • it has 1A current without a heatsink.
  • it gives 2 A current with the heat sink.
  • 3 to 5.5V is logical input.

A4988 Stepper Motor Driver

The A4988 driver Stepper Motor Driver is available in Pakistan and this is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988.

There are no phase sequence tables, the high-frequency control interface programming etc. The application of A4988 interface is very suitable for a complex microprocessor is not available or overload. In the stepping operation, the chopping control in the A4988 automatically selects the current decay mode (slow or mixed). The mix decay current control scheme can reduce the audible motor noise, increased step accuracy, and reduced power consumption. Explore more automation components in our Arduino and Accessories or Electronics Components categories.

Specifications and Features :

  1. Supply Voltage : 8-35 VDC.
  2. Current : 1.0A (no heatsink ).
  3. Current : 2.0A (with heat-sinking).
  4. logic input : 3 – 5.5V .
  5. Automatic current decay mode detection/choice.
  6. Mixed with slow current decay mode.
  7. The low power dissipation of synchronous rectifier.
  8. Internal UVLO(ultra voltage lockout).
  9. Crossover current protection.
  10. Thermal shutdown circuit.
  11. Ground fault protection.
  12. Loading and short circuit protection.
  13. The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.

⚠️ Precautions:

  • Set current limit before connecting motor

  • Use heat sinks for continuous high-current applications

  • Ensure proper wiring to avoid motor burnout

  • Don’t exceed rated voltage or current

  • Avoid reverse polarity on VCC or GND

📺 YouTube Tutorial:

🎥 A4988 Stepper Driver Setup and Tutorial


🏪 Shop Address:

Electroway, Johar Town (Near UMT), Lahore, Pakistan
📦 Shipping available all over Pakistan: Multan, Karachi, Rawalpindi, Peshawar & more.

Package Includes:

  • 1X A4988
  • 1X heatsink

 

1
1
Your Cart