-
5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module
Original price was: ₨ 400.₨ 330Current price is: ₨ 330.
- (0-2.5V state low relay OFF)
- (3.3-5V state high relay ON)
- Module interface:
- Input section:
- DC +: positive power supply (by relay voltage power supply)
- DC-: connect power negative
- CH: Relay module signal to trigger the end (high level trigger effective)
-
5V 4 Channel Relay Module Board
Original price was: ₨ 450.₨ 380Current price is: ₨ 380.
When using the Arduino do interactive projects, a lot of heavy current or high voltage equipment is usually not directly use the Arduino digital IO port control(such as solenoid valves, lights, motors, etc.), can consider to use solutions of relay.
Arduino Relay shields is to use pine le Relay with high quality, provide 4 road input and output, the highest can meet 250 v / 10A communication device Or dc 24 v /10A equipment, thus can be used to control lights, motors, etc.
Modular design makes it easy to plate is connected with the Arduino extension. Relay output state is represented by a light emitting diode, convenient and practical use. -
5V 6Channel Relay Module
Original price was: ₨ 800.₨ 700Current price is: ₨ 700.
It is double-sided compacted PCB and it is also high quality.
It has Opto-Isolated inputs. And optoisolated inputs mean digital electronics are safe and noise-free.
This 6 relay module board is active low 5V.
This board consists of 6 relays, and this board can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
These relays are used to control various appliances and other equipment with large current.
Its maximum output contact is AC 250V, 10A, and DC 30V 10A.
Its standard interface can be directly connected with the microcontrollers.
There are red working status indicator lights and it shows the safe use of the conductive.
It is widely used for all MCU control.
It is also used in the industrial sector, PLC control, smart home control.
-
DHT22 Digital Temperature and Humidity Sensor Module
Original price was: ₨ 1,000.₨ 550Current price is: ₨ 550.
The DHT22 is a high-precision digital temperature and humidity sensor module ideal for Arduino, Raspberry Pi, ESP8266, IoT systems, smart homes, and weather stations. With stable output, wide range, and digital signal interface, it’s perfect for climate monitoring, automation, and data logging projects.
-
DS18B20 Temperature Sensor Module
Original price was: ₨ 300.₨ 230Current price is: ₨ 230.
DS18B20 Temperature Sensor Module is a digital temperature sensor, and you can easily connect it to Arduino with only one 4.7-pound resistor, base 1 – Ground 2 – Output – Base 3 to the positive of the source, with resistance to base 2 Is connected. The connection of this sensor to the Arduino via the 1-wire protocol is established. Therefore, several sensors can be connected only through one common wire to Arduino. The output is digitally accurate to 12 bits. Therefore, the temperature can be measured with a precision of 0.0625 º C.
-
ESP8266 WiFi ESP-01 Serial Module
Original price was: ₨ 400.₨ 340Current price is: ₨ 340.
- Its Wifi range is 802.11 b/g/n
- Its WIFi direct (P2P), soft-AP.
- It is an integrated TCP/IP protocol stack.
- It is an integrated TR switch, balun, LNA, power amplifier, and matching network.
- It is integrated PLLs, regulators, DCXO, and power management units.
- There is +19.5dBm output power in 802.11b mode.
- It has a power-down leakage current of <10uA.
-
Infrared IR Flame Sensor Detection Module
Original price was: ₨ 200.₨ 140Current price is: ₨ 140.
The IR Flame Sensor Detection Module detects fire-like infrared light at 760nm–1100nm. Operating at 3.3V–5V, it’s ideal for Arduino, robotics, smart fire alert systems, and STEM projects. Features onboard comparator, digital/analog output, and high sensitivity to flame intensity. Perfect for fire safety automation and DIY electronics in Johar Town, Lahore.
-
KY-008 Laser Sensor Module
Original price was: ₨ 150.₨ 90Current price is: ₨ 90.
The KY-008 Laser Sensor Module operates at 5V and emits a focused 650nm red laser beam. Designed for Arduino, IoT, robotics, and automation projects, it offers precise targeting and easy interfacing. With low current consumption (30mA), it’s ideal for compact embedded systems. Use it in laser communication, tripwire alarms, laser pointers, or distance-sensing systems.
-
LM393 3-Pin Photosensitive Sensor Module
Original price was: ₨ 200.₨ 100Current price is: ₨ 100.
This 3-Pin LM393 Photosensitive Sensor Module features a built-in comparator for accurate light detection. Operating at 3.3V–5V, it provides both analog and digital output. Perfect for Arduino projects, IoT systems, smart lighting, and light-sensitive automation circuits.
-
MQ136 Hydrogen Sulfide Detection Module
Original price was: ₨ 6,500.₨ 6,000Current price is: ₨ 6,000.
Detect hazardous Hydrogen Sulfide (H₂S) gas with the MQ136 Gas Sensor Module. Operating at 5V, this module features high sensitivity, low power consumption, and a fast response time. Ideal for Arduino, Raspberry Pi, and IoT gas monitoring systems. Output: Analog & Digital. Widely used in air quality monitoring, industrial safety, and smart home projects.
-
Relay Module 5V 2 Channel Low Level Trigger
Original price was: ₨ 250.₨ 200Current price is: ₨ 200.
- it is a 5V two-channel relay interface board and each relay is 15 to 20mA Driver current.
- it is equipped with a high current relay, AC250V 10A, and DC30V 10A.
- it is a standard interface that can be controlled directly by a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic active low).
- it indicates LEDs for relay output status.
-
USB to ESP8266 Adapter Module
Original price was: ₨ 300.₨ 240Current price is: ₨ 240.
Key Features:
- CH340 chip for reliable connection
- Stable performance and compatibility
- 1000uF solid-state capacitors for power supply
- Compact size (34.5 x 17.2mm)
- Easy to use and install
Applications:
- ESP8266 module development and debugging
- IoT projects
- Home automation
- Robotics
