-
Orignal Imported 2wd Smart Robot Car Chassis Kit
Original price was: ₨ 950.₨ 850Current price is: ₨ 850.
Voltage: DC 6V
Current: 120MA
Reduction rate: 48:1
RPM (With tire): 240
Tire Diameter: 66mm
Car Speed(M/minute): 48
Motor Weight (g): 50
Motor Size: 70mm*22mm*18mm
Noise: <65dB Tire Size
Tire Size Center hole: Long 5.3MM, 3.5MM
wide Diameter: 66MM
Width: 26MM
DC Gear Motor
No load speed (6V): 200RPM ±10%
No load current (6V): ≤200mA
No load speed (3V): 90RPM ±10%
No load current (3V): ≤150mA
Voltage: 3-6 V
Reduction ratio is 1:48 -
PASTE BROZA
Original price was: ₨ 100.₨ 30Current price is: ₨ 30.
PASTE BROZA is a versatile soldering flux paste designed to improve solder flow, reduce oxidation, and enhance joint strength. Ideal for PCB repair, wire soldering, and electronics assembly, it ensures clean and consistent results with minimal residue.
-
Photocell Street Light Sun Switch Sensor 12V
Original price was: ₨ 500.₨ 380Current price is: ₨ 380.
Upgrade outdoor automation with this 12V Photocell Sun Switch Sensor. Ideal for smart street lighting and solar projects. Operating voltage: 12V DC, load: up to 10A. Automatically turns lights ON at dusk and OFF at dawn—perfect for Arduino, IoT, and DIY lighting setups.
-
PIC16F887 Microcontroller
Original price was: ₨ 850.₨ 750Current price is: ₨ 750.
The PIC16F887 is a reliable 8-bit microcontroller with 14KB flash memory, 10-bit ADC, and up to 35 configurable I/O pins. It’s well-suited for automation, sensor-based applications, and embedded control systems where performance, cost-efficiency, and ease of programming matter.
-
PIC30F2010 28Pin 20MHz 16Bit In
Original price was: ₨ 1,100.₨ 890Current price is: ₨ 890.
The PIC30F2010 is a 16-bit dsPIC® digital signal controller (DSC) delivering up to 20 MIPS, housed in a 28-pin through‑hole package, featuring 12 KB Flash, 512 B RAM, 6-channel ADC, motor-control PWM, and encoder interface—optimized for industrial, control, and motor applications.
-
Pre Soldered Arduino Nano V3.0 With Cable in Pakistan
Original price was: ₨ 950.₨ 800Current price is: ₨ 800.
The Pre-Soldered Arduino Nano V3.0 (with USB Cable) is a compact, breadboard-friendly microcontroller based on the ATmega328P. Ideal for robotics and IoT.
-
Microcontroller: ATmega328P
-
USB Interface: Mini USB (Cable Included)
-
I/O Pins: 22 (14 Digital, 8 Analog)
-
Board Type: Nano V3.0 with pre-soldered headers
-
-
Pre Soldered ESP32 S3 WROOM 1 Development Board 2.4G Wifi BT Module BLE5.0
Original price was: ₨ 2,000.₨ 1,650Current price is: ₨ 1,650.
The ESP32-S3 WROOM-1 Pre-Soldered Development Board is a powerful WiFi + Bluetooth 5.0 BLE dual-core microcontroller designed for high-performance IoT, AI, and embedded projects. Featuring 2.4GHz WiFi, USB support, pre-soldered headers, and support for Arduino, MicroPython, and ESP-IDF, it’s ideal for smart devices, robotics, and wireless applications.
-
Operating Voltage: 3.3V
-
Dual-core 240MHz Tensilica LX7 CPU
-
Built-in 512KB SRAM, 384KB ROM
-
USB OTG, ADCs, GPIOs, PWM support
-
-
Precision Tweezers
Original price was: ₨ 270.₨ 200Current price is: ₨ 200.
The DT20 Perforated Tweezer is a high-precision, anti-static tweezer crafted from corrosion-resistant stainless steel. Featuring a curved fine-point tip and an ergonomic perforated handle, it is designed for accurate handling of tiny electronic components, especially during SMD soldering, circuit repairs, and delicate PCB work. Ideal for use with Arduino, Raspberry Pi, and other DIY electronics platforms, this tweezer ensures both control and safety in high-precision environments.
-
Prototype Shield for Arduino UNO
Original price was: ₨ 280.₨ 245Current price is: ₨ 245.
The Prototype Shield for Arduino UNO is a solderable expansion board designed to help you build and test custom circuits. It includes a mini breadboard, reset button, power lines, and access to all Arduino pins, making it perfect for rapid prototyping and circuit development.
-
Pure Copper 12V DC Motor For Air Cooler & Stand Fan Original Baleno High Speed
Original price was: ₨ 2,000.₨ 1,500Current price is: ₨ 1,500.
The Pure Copper 12V DC Motor by Baleno is a high-speed, heavy-duty fan motor designed for air coolers, pedestal fans, and ventilation systems. Built with 100% copper windings, it ensures high efficiency, thermal stability, and long operational life. Operating at 12V, it delivers powerful airflow with minimal noise, making it ideal for both home and industrial ventilation setups.
-
Pwm Controller Dc Motor Speed Controller 12v-40v 10a
Original price was: ₨ 750.₨ 650Current price is: ₨ 650.
This PWM DC Motor Speed Controller (12V–40V, 10A) is designed to control motor speed smoothly and efficiently using Pulse Width Modulation (PWM) technology. It supports input voltages from 12V to 40V and outputs up to 10A current, making it perfect for DC motor control, DIY automation, fans, and smart electronics projects.
-
QTR-8RC Line Following Sensor
Original price was: ₨ 600.₨ 500Current price is: ₨ 500.
The QTR-8RC Line Following Sensor is an 8-channel array designed for detecting black lines on a white surface, making it perfect for line-following robots. It operates at 3.3V to 5V, with a fast response time and high precision, enabling precise line tracking and navigation. This sensor is ideal for educational robotics, STEM projects, and DIY robotic applications.
