-
AM2302 Temperature and Humidity Sensor
Original price was: ₨ 1,100.₨ 900Current price is: ₨ 900.
- AM2302 (Wired DHT22) Temperature and Humidity Sensor operating voltage 3 to 5 volts DC.
- Its maximum current consumption is approximately 2.5mA during a data request.
- The user is able to get new data once every 2 seconds.
- it provides output as a digital single bus.
- Its air humidity measuring range is 0 to 100%.
- 0 to 80 degrees centigrade is its temperature measuring range.
- Its air humidity tolerance range is 2 to 5%.
-
Automatic Light Control Sun Switch LDR (220V 10A)
Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
Automate lighting with this 220V LDR Sun Switch. Supports up to 10A load, ideal for outdoor lights, security systems, and smart home automation. Turns lights ON at dusk and OFF at dawn using light-sensing technology. Weatherproof and perfect for DIY and IoT projects.
-
Basic Kit for Incubator including W1209 + Casing + Adapter and 2 Pin DC Connector
Original price was: ₨ 1,000.₨ 700Current price is: ₨ 700.
The Basic Kit for Incubator is a complete set featuring the W1209 Temperature Controller, durable protective casing, power adapter, and 2-pin DC connector. Designed for egg incubators, DIY temperature control systems, and automation projects, it provides reliable thermal management with accurate digital display and relay control.
-
BH1750 Digital Light Intensity Lux Sensor Module
Original price was: ₨ 550.₨ 450Current price is: ₨ 450.
High-precision BH1750 Digital Light Intensity Sensor Module for lux measurement with an I2C interface, ideal for Arduino, Raspberry Pi, and IoT projects requiring accurate ambient light detection.
-
Capacitive Soil Moisture Sensor Module
Original price was: ₨ 200.₨ 145Current price is: ₨ 145.
The Capacitive Soil Moisture Sensor Module is a highly reliable, corrosion-resistant soil humidity sensor designed to measure moisture levels in the soil using capacitive sensing technology. Ideal for Arduino, Raspberry Pi, and automatic irrigation systems.
-
Car Mounted Acrylic Holder for HC-SR04 Ultrasonic Sensor
Original price was: ₨ 100.₨ 60Current price is: ₨ 60.
The Car Mounted Acrylic Holder for HC-SR04 Ultrasonic Transducer is a precision-cut transparent mounting bracket designed for securely installing HC-SR04 Ultrasonic Sensors in smart car, obstacle-avoidance, and robotic projects. It provides accurate sensor alignment, stable placement, and easy integration into Arduino and robotics systems.
-
Dallas 18B20 Temperature Sensor
Original price was: ₨ 350.₨ 250Current price is: ₨ 250.
The Dallas 18B20 Temperature Sensor is a digital thermometer providing precise temperature readings over a wide range using a 1-Wire communication protocol. It delivers reliable, high-accuracy temperature data ideal for Arduino, ESP32, and Raspberry Pi projects, including environmental monitoring, automation, and industrial control systems.
-
DC 12V-24V 8A Infrared PIR Motion Sensor
Original price was: ₨ 1,000.₨ 700Current price is: ₨ 700.
High-sensitivity DC 12 V–24 V PIR motion sensor with 8 A output, adjustable delay, and wide detection angle—ideal for LED lighting, security, and automation.
-
DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor
Original price was: ₨ 800.₨ 700Current price is: ₨ 700.
The MAX6675 Module with K-Type Thermocouple is a high-precision digital temperature sensor designed for accurate high-temperature measurements. Featuring a wide temperature range (0°C to 1024°C), digital SPI communication, and cold junction compensation, this module is ideal for Arduino, industrial automation, IoT applications, HVAC systems, kilns, and scientific research.
-
DHT11 Temperature Humidity Sensor Module for Arduino
Original price was: ₨ 300.₨ 200Current price is: ₨ 200.
The DHT11 is a digital temperature and humidity sensor. DHT11 sensor has a built-in NTC thermistor to measure humidity and a capacitive humidity sensor to measure temperature.Digital temperature and humidity sensor DHT11 is a low-cost, easy-to-use sensor that is commonly used in a variety of applications. DHT11 sensor has a single data pin that is used to communicate with the host microcontroller. The sensor uses a one-wire protocol, which makes it easy to interface with the microcontroller. DHT11 sensor can be read by the microcontroller using a simple polling method.The DHT11 sensor has a temperature range of 0°C to 50°C and a humidity range of 20% to 90%. The sensor has an accuracy of ±2°C and ±5%RH. The DHT11 sensor is a reliable and accurate sensor that is a good choice for many applications.It is important to note that the DHT11 not designed to be powered by a higher voltage than 5.5V, as this could damage the sensor. The DHT11 is a digital temperature and humidity sensor that can power by a voltage range of 3.3V to 5.5V. The recommended input voltage for the DHT11 is 5V.The DHT11 has a maximum current draw of 2.5mA, which is relatively low. This means that the DHT11 can power by a small battery or a USB power supply. The DHT11 has a data pin that used to communicate with the host microcontroller. The data pin pulled up to 5V by a 10K resistor. This means that the microcontroller can read the data from the DHT11 without having to provide any additional power to the sensor. -
DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor
Original price was: ₨ 1,000.₨ 900Current price is: ₨ 900.
The DHT21/AM2301 is a high-precision capacitive digital temperature and humidity sensor operating at 3.3V–5.5V. It offers a wide temperature range of -40°C to 80°C and 0–100% RH with ±0.5°C and ±3% RH accuracy. Ideal for Arduino, IoT, weather monitoring, and smart home automation projects.
-
DHT22 Digital Temperature and Humidity Sensor Module
Original price was: ₨ 1,000.₨ 550Current price is: ₨ 550.
The DHT22 is a high-precision digital temperature and humidity sensor module ideal for Arduino, Raspberry Pi, ESP8266, IoT systems, smart homes, and weather stations. With stable output, wide range, and digital signal interface, it’s perfect for climate monitoring, automation, and data logging projects.
