-
16 Channel 5V Relay Module
Original price was: ₨ 2,000.₨ 1,800Current price is: ₨ 1,800.
Short Description :
- 5V 16-Channel Relay interface board and each one needs 50-60mA driver current
- Equipped with high-current relay, AC250V 10A; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED for Relay output status
- Size: 18 x 9 x 1.6cm
-
4 Channel Solid State Relay Module
Original price was: ₨ 1,500.₨ 1,050Current price is: ₨ 1,050.
4 Channel 5V solid state relay 240V 2A:
- Size:71*62mm*24mm
- Power supply: 5V DC(160mA)
Input control signal voltage:
- (0-0.5V low stage SSR is OFF)
- (2.5-20V high stage SSR is ON)
SSR Output (each channel):
- Load voltage range: 75 to 264VAC (50/60Hz).
- Load current: 0.1 to 2 AMP.
Power supply:
- 5VDC / 160mA (all channel ON).
-
5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module
Original price was: ₨ 400.₨ 330Current price is: ₨ 330.
- (0-2.5V state low relay OFF)
- (3.3-5V state high relay ON)
- Module interface:
- Input section:
- DC +: positive power supply (by relay voltage power supply)
- DC-: connect power negative
- CH: Relay module signal to trigger the end (high level trigger effective)
-
5V 4 Channel Relay Module Board
Original price was: ₨ 450.₨ 380Current price is: ₨ 380.
When using the Arduino do interactive projects, a lot of heavy current or high voltage equipment is usually not directly use the Arduino digital IO port control(such as solenoid valves, lights, motors, etc.), can consider to use solutions of relay.
Arduino Relay shields is to use pine le Relay with high quality, provide 4 road input and output, the highest can meet 250 v / 10A communication device Or dc 24 v /10A equipment, thus can be used to control lights, motors, etc.
Modular design makes it easy to plate is connected with the Arduino extension. Relay output state is represented by a light emitting diode, convenient and practical use. -
5V 6Channel Relay Module
Original price was: ₨ 800.₨ 700Current price is: ₨ 700.
It is double-sided compacted PCB and it is also high quality.
It has Opto-Isolated inputs. And optoisolated inputs mean digital electronics are safe and noise-free.
This 6 relay module board is active low 5V.
This board consists of 6 relays, and this board can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
These relays are used to control various appliances and other equipment with large current.
Its maximum output contact is AC 250V, 10A, and DC 30V 10A.
Its standard interface can be directly connected with the microcontrollers.
There are red working status indicator lights and it shows the safe use of the conductive.
It is widely used for all MCU control.
It is also used in the industrial sector, PLC control, smart home control.
-
5V 8 Channel Relay Module Board
Original price was: ₨ 1,000.₨ 800Current price is: ₨ 800.
The 8-Channel Relay Module (5V) is a high-quality relay board designed for switching AC and DC loads. Compatible with Arduino, Raspberry Pi, and microcontrollers, it allows independent control of 8 devices, making it ideal for home automation, industrial control, and IoT projects. Features optocoupler isolation for enhanced safety and reliability
-
5V One Channel Relay Module
Original price was: ₨ 200.₨ 150Current price is: ₨ 150.
This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB: -
Relay Module 5V 2 Channel Low Level Trigger
Original price was: ₨ 250.₨ 200Current price is: ₨ 200.
- it is a 5V two-channel relay interface board and each relay is 15 to 20mA Driver current.
- it is equipped with a high current relay, AC250V 10A, and DC30V 10A.
- it is a standard interface that can be controlled directly by a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, MSP430, TTL logic active low).
- it indicates LEDs for relay output status.
-
Solid State Relay SSR Module 2 Channel For Arduino
Original price was: ₨ 600.₨ 500Current price is: ₨ 500.
The 2-Channel Solid State Relay (SSR) Module is a high-performance switching device designed for fast, noise-free, and reliable AC load control. It operates silently with no mechanical wear, making it ideal for home automation, industrial applications, and microcontroller-based projects. Compatible with Arduino, Raspberry Pi, and other controllers, it ensures safe and efficient switching of electrical devices.
