-
16 Channel 5V Relay Module
Original price was: ₨ 2,000.₨ 1,800Current price is: ₨ 1,800.
Short Description :
- 5V 16-Channel Relay interface board and each one needs 50-60mA driver current
- Equipped with high-current relay, AC250V 10A; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED for Relay output status
- Size: 18 x 9 x 1.6cm
-
4 Channel Solid State Relay Module
Original price was: ₨ 1,500.₨ 1,050Current price is: ₨ 1,050.
4 Channel 5V solid state relay 240V 2A:
- Size:71*62mm*24mm
- Power supply: 5V DC(160mA)
Input control signal voltage:
- (0-0.5V low stage SSR is OFF)
- (2.5-20V high stage SSR is ON)
SSR Output (each channel):
- Load voltage range: 75 to 264VAC (50/60Hz).
- Load current: 0.1 to 2 AMP.
Power supply:
- 5VDC / 160mA (all channel ON).
-
5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module
Original price was: ₨ 400.₨ 330Current price is: ₨ 330.
- (0-2.5V state low relay OFF)
- (3.3-5V state high relay ON)
- Module interface:
- Input section:
- DC +: positive power supply (by relay voltage power supply)
- DC-: connect power negative
- CH: Relay module signal to trigger the end (high level trigger effective)
-
5V 4 Channel Relay Module Board
Original price was: ₨ 450.₨ 380Current price is: ₨ 380.
When using the Arduino do interactive projects, a lot of heavy current or high voltage equipment is usually not directly use the Arduino digital IO port control(such as solenoid valves, lights, motors, etc.), can consider to use solutions of relay.
Arduino Relay shields is to use pine le Relay with high quality, provide 4 road input and output, the highest can meet 250 v / 10A communication device Or dc 24 v /10A equipment, thus can be used to control lights, motors, etc.
Modular design makes it easy to plate is connected with the Arduino extension. Relay output state is represented by a light emitting diode, convenient and practical use. -
5V 6Channel Relay Module
Original price was: ₨ 800.₨ 700Current price is: ₨ 700.
It is double-sided compacted PCB and it is also high quality.
It has Opto-Isolated inputs. And optoisolated inputs mean digital electronics are safe and noise-free.
This 6 relay module board is active low 5V.
This board consists of 6 relays, and this board can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.
These relays are used to control various appliances and other equipment with large current.
Its maximum output contact is AC 250V, 10A, and DC 30V 10A.
Its standard interface can be directly connected with the microcontrollers.
There are red working status indicator lights and it shows the safe use of the conductive.
It is widely used for all MCU control.
It is also used in the industrial sector, PLC control, smart home control.
-
5V 8 Channel Relay Module Board
Original price was: ₨ 1,000.₨ 800Current price is: ₨ 800.
The 8-Channel Relay Module (5V) is a high-quality relay board designed for switching AC and DC loads. Compatible with Arduino, Raspberry Pi, and microcontrollers, it allows independent control of 8 devices, making it ideal for home automation, industrial control, and IoT projects. Features optocoupler isolation for enhanced safety and reliability
-
5V One Channel Relay Module
Original price was: ₨ 200.₨ 150Current price is: ₨ 150.
This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB: -
Arduino Sensor Kit In Pakistan 37 In 1 Sensors Kit For Arduino In Pakistan
Original price was: ₨ 2,900.₨ 2,400Current price is: ₨ 2,400.
Arduino Sensor Kit in Pakistan 37 in 1 sensors kit for Arduino in Pakistan. Do you have a good understanding of various sensors or need a variety of them for a project? This kit includes a sensor for just about every job. With everything included in this kit, you’ll be able to sense gesture, humidity, temperature, motion, touch, sound, and more! These are some of our favorite sensors from each category. This version of the kit has received a complete overhaul! Check out the Kit Includes section below for a complete list of what is included in this kit to find out what has changed. This huge assortment of sensors makes an amazing gift for that very special electronics enthusiast in your life!
-
Bluetooth Module HC05
Original price was: ₨ 650.₨ 600Current price is: ₨ 600.
Specifications:
This Bluetooth module
Its operating voltages are 4 to 6 volts.
Its operating current is 30mA.
It ranges us 100m.
It works with serial communication and TTL compatible.
It follows the IEEE 802.15.1 standard protocol.
it can operate in master or slave mode or in both modes.
We can interface it with a laptop or mobile phone.
-
D1-Mini WIFI Development Board.
Original price was: ₨ 750.₨ 600Current price is: ₨ 600.
- It contains 11 digital input/output pins.
- These all pins have interrupt/ PWM/ I2C/ one-wire (except D0).
- It has an analog input pin of 3.2V.
- It has a Micro USB connection.
- This WIFI board uses BRT (Bias Resistor Transistor).
- This board is easier in flash mode.
-
ESP Wroom 32 38 Pin Development Board Module
Original price was: ₨ 1,500.₨ 1,170Current price is: ₨ 1,170.
38 Pin Nodemcu Esp32s Microcontroller Wifi & Bluetooth Esp Wroom 32 Development Board Module
This powerful and versatile development board is ideal for a wide range of IoT projects, offering exceptional performance and connectivity. Powered by the Espressif ESP32-S microcontroller, it boasts dual-core processors, Wi-Fi 802.11b/g/n, Bluetooth 4.2 Classic, and Bluetooth Low Energy (BLE) capabilities -
ESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
Original price was: ₨ 1,200.₨ 1,050Current price is: ₨ 1,050.
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller. The ESP32 is integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance, and RF performance is the best, safe and reliable, easy to extend to a variety of applications.
