U-Blox NEO-6M NEO6MV2 GPS Module

The U-Blox NEO-6M NEO6MV2 GPS Module is a reliable and high-performance satellite positioning solution, perfect for DIY and professional projects that require real-time location data, tracking, and navigation. With its advanced u-blox NEO-6M chipset, this module delivers accurate GPS performance with minimal latency, even in complex environments.

It connects easily to microcontrollers via UART serial communication, using the standard NMEA protocol, and operates at a default baud rate of 9600 bps. The onboard 3.3V voltage regulator allows compatibility with both 3.3V and 5V systems, including Arduino, Raspberry Pi, and ESP32 boards.

Equipped with an external active GPS antenna and an EEPROM, the module retains settings across reboots and offers stable signal acquisition. This makes it ideal for embedded and mobile applications such as drones, robotics, asset tracking, smart agriculture, and IoT systems.

🛰️ Whether you’re logging GPS coordinates, building a custom navigation system, or integrating satellite data into your IoT devices, this module offers a robust and tested platform.

Here you get GPS module Neo6m V2 U box in reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan and all over Pakistan. Online Shopping website for GPS module Neo6m V2 U box.
This is a complete GPS module that is based on the Ublox NEO-6M. This unit uses the latest technology from Ublox to give the best possible positioning information and includes a larger built-in 25 x 25mm active GPS antenna with a UART TTL socket. A battery is also included so that you can obtain a GPS lock faster. This is an updated GPS module that can be used with ardupilot mega v2. This GPS module gives the best possible position information, allowing for better performance with your Ardupilot or other Multirotor control platform.

The Ublox NEO-6M GPS engine on this board is a quite good one, with the high precision binary output. It has also high sensitivity for indoor applications. UBLOX NEO-6M GPS Module has a battery for power backup and EEPROM for storing configuration settings. The antenna is connected to the module through a ufl cable which allows for flexibility in mounting the GPS such that the antenna will always see the sky for best performance. This makes it powerful to use with cars and other mobile applications.

The Ublox GPS module has serial TTL output, it has four pins: TX, RX, VCC, and GND. You can download the u-center software for configuring the GPS and changing the settings and much more. It is really good software (see link below).

NOTE:  Ublox NEO-6M GPS Module IS NOT COMPATIBLE WITH APM 2.8 FLIGHT CONTROLLER 

Features of GPS Module:

1. 5Hz position update rate
2. Operating temperature range: -40 TO 85°CUART TTL socket
3. EEPROM to save configuration settings
4. Rechargeable battery for Backup
5. The cold start time of 38 s and Hot start time of 1 s
6. Supply voltage: 3.3 V
7. Configurable from 4800 Baud to 115200 Baud rates. (default 9600)
8. SuperSense ® Indoor GPS: -162 dBm tracking sensitivity
9. Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
10. Separated 18X18mm GPS antenna
    

    ⚠️ Precautions & Usage Tips:

    • Always connect the antenna before powering to avoid weak GPS locks.

    • Use outdoors or near a window for faster satellite acquisition.

    • Use short, shielded wires for UART to reduce signal interference.

    • Add a capacitor (e.g., 100µF) between VCC and GND for stable performance during GPS lock attempts.

    • Be patient during the initial lock (cold start), especially in urban or covered areas.

🔗 Helpful Links & Related Products:

• ElectroWay Tools & Accessories

• Arduino Relay Modules

• Home Automation Components

• Arduino Starter Kit

Package Includes In This GPS Module:

• 1 x Ublox NEO-6M GPS Board
• 1 x Detachable Antenna