-
N20 6V 85RPM DC Micro Metal Gear Motor
Original price was: ₨ 200.₨ 150Current price is: ₨ 150.
The N20 6V 85RPM DC Micro Metal Gear Motor is a compact and lightweight brushed motor with built-in gear reduction, ideal for precision robotics and automation projects. Operating at 6V, it offers balanced speed and torque, making it perfect for micro smart cars, robotic arms, and mechanical assemblies where space-saving and accuracy are critical.
-
NodeMCU V2 Lua Wifi Iot Development Board Esp 12E Esp8266
Original price was: ₨ 900.₨ 700Current price is: ₨ 700.
The NodeMCU V2 ESP8266 ESP-12E WiFi Development Board is a compact and efficient microcontroller platform ideal for IoT, home automation, and STEM-based electronics. Powered by the ESP8266 SoC, it supports 3.3V logic level, comes with USB to serial converter (CP2102), and offers seamless WiFi connectivity, GPIO, PWM, I2C, and UART. Perfect for Arduino, Lua scripting, and web-based applications.
-
NodeMcu Wroom Esp32 Wifi Based Microcontroller Development Board
Original price was: ₨ 1,200.₨ 900Current price is: ₨ 900.
- Current receiving 80mA.
- the voltage supply is 2.2V to 3.6V.
- current transmitting is 80mA.
- The number of pins supported is 30.
- The data rate is 54Mbps.
- The frequency is 2.4GHz.
- Surface mount type.
- operating temperature is -40 to 85 degrees centigrade.
- power output is 16.5dBm.
- Integrated 520Kb SRAM.
- Ultra-low-power management.
- 4 Mb flash.
- On-board PCB antenna.
-
Orignal Imported 2wd Smart Robot Car Chassis Kit
Original price was: ₨ 950.₨ 850Current price is: ₨ 850.
Voltage: DC 6V
Current: 120MA
Reduction rate: 48:1
RPM (With tire): 240
Tire Diameter: 66mm
Car Speed(M/minute): 48
Motor Weight (g): 50
Motor Size: 70mm*22mm*18mm
Noise: <65dB Tire Size
Tire Size Center hole: Long 5.3MM, 3.5MM
wide Diameter: 66MM
Width: 26MM
DC Gear Motor
No load speed (6V): 200RPM ±10%
No load current (6V): ≤200mA
No load speed (3V): 90RPM ±10%
No load current (3V): ≤150mA
Voltage: 3-6 V
Reduction ratio is 1:48 -
PASTE BROZA
PASTE BROZA is a versatile soldering flux paste designed to improve solder flow, reduce oxidation, and enhance joint strength. Ideal for PCB repair, wire soldering, and electronics assembly, it ensures clean and consistent results with minimal residue.
-
Photocell Street Light Sun Switch Sensor 12V
Original price was: ₨ 500.₨ 380Current price is: ₨ 380.
Upgrade outdoor automation with this 12V Photocell Sun Switch Sensor. Ideal for smart street lighting and solar projects. Operating voltage: 12V DC, load: up to 10A. Automatically turns lights ON at dusk and OFF at dawn—perfect for Arduino, IoT, and DIY lighting setups.
-
Pre Soldered Arduino Nano V3.0 With Cable in Pakistan
Original price was: ₨ 950.₨ 800Current price is: ₨ 800.
The Pre-Soldered Arduino Nano V3.0 (with USB Cable) is a compact, breadboard-friendly microcontroller based on the ATmega328P. Ideal for robotics and IoT.
-
Microcontroller: ATmega328P
-
USB Interface: Mini USB (Cable Included)
-
I/O Pins: 22 (14 Digital, 8 Analog)
-
Board Type: Nano V3.0 with pre-soldered headers
-
-
Pre Soldered ESP32 S3 WROOM 1 Development Board 2.4G Wifi BT Module BLE5.0
Original price was: ₨ 2,000.₨ 1,650Current price is: ₨ 1,650.
The ESP32-S3 WROOM-1 Pre-Soldered Development Board is a powerful WiFi + Bluetooth 5.0 BLE dual-core microcontroller designed for high-performance IoT, AI, and embedded projects. Featuring 2.4GHz WiFi, USB support, pre-soldered headers, and support for Arduino, MicroPython, and ESP-IDF, it’s ideal for smart devices, robotics, and wireless applications.
-
Operating Voltage: 3.3V
-
Dual-core 240MHz Tensilica LX7 CPU
-
Built-in 512KB SRAM, 384KB ROM
-
USB OTG, ADCs, GPIOs, PWM support
-
-
Precision Tweezers
Original price was: ₨ 270.₨ 200Current price is: ₨ 200.
The DT20 Perforated Tweezer is a high-precision, anti-static tweezer crafted from corrosion-resistant stainless steel. Featuring a curved fine-point tip and an ergonomic perforated handle, it is designed for accurate handling of tiny electronic components, especially during SMD soldering, circuit repairs, and delicate PCB work. Ideal for use with Arduino, Raspberry Pi, and other DIY electronics platforms, this tweezer ensures both control and safety in high-precision environments.
-
Prototype Shield for Arduino UNO
Original price was: ₨ 280.₨ 245Current price is: ₨ 245.
The Prototype Shield for Arduino UNO is a solderable expansion board designed to help you build and test custom circuits. It includes a mini breadboard, reset button, power lines, and access to all Arduino pins, making it perfect for rapid prototyping and circuit development.
-
Pure Copper 12V DC Motor For Air Cooler & Stand Fan Original Baleno High Speed
Original price was: ₨ 2,000.₨ 1,500Current price is: ₨ 1,500.
The Pure Copper 12V DC Motor by Baleno is a high-speed, heavy-duty fan motor designed for air coolers, pedestal fans, and ventilation systems. Built with 100% copper windings, it ensures high efficiency, thermal stability, and long operational life. Operating at 12V, it delivers powerful airflow with minimal noise, making it ideal for both home and industrial ventilation setups.
-
Pwm Controller Dc Motor Speed Controller 12v-40v 10a
Original price was: ₨ 750.₨ 650Current price is: ₨ 650.
This PWM DC Motor Speed Controller (12V–40V, 10A) is designed to control motor speed smoothly and efficiently using Pulse Width Modulation (PWM) technology. It supports input voltages from 12V to 40V and outputs up to 10A current, making it perfect for DC motor control, DIY automation, fans, and smart electronics projects.
