-
15A 400W MOSFET Trigger Switch Drive Module PWM Re in Pakistan
Original price was: ₨ 150.₨ 130Current price is: ₨ 130.
The 15A 400W MOSFET Trigger Switch Drive Module is a high-power, fast-switching control board ideal for driving high-current DC loads using PWM signals. It supports up to 15A continuous current and 400W power, making it perfect for motors, LED strips, heating elements, and other inductive/resistive loads. Fully compatible with Arduino, Raspberry Pi, and industrial control systems.
-
16 Channel 5V Relay Module
Original price was: ₨ 2,000.₨ 1,800Current price is: ₨ 1,800.
Short Description :
- 5V 16-Channel Relay interface board and each one needs 50-60mA driver current
- Equipped with high-current relay, AC250V 10A; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED for Relay output status
- Size: 18 x 9 x 1.6cm
-
16 Channel Servo Motor Driver Pca9685 12 Bit Pwm I2c Module For Arduino
Original price was: ₨ 1,000.₨ 750Current price is: ₨ 750.
The PCA9685 16-Channel 12-bit PWM Servo Motor Driver is an I2C-controlled module capable of driving 16 PWM outputs with 12-bit resolution (4096 steps) over just 2 I2C pins. Ideal for controlling servo motors, LEDs, and robotic arms with Arduino, Raspberry Pi, or ESP32, making it a perfect choice for multi-axis robotics and IoT automation.
-
2000W 25A Adjustable AC Dimmer AC Heater Controller
Original price was: ₨ 500.₨ 400Current price is: ₨ 400.
The 2000W 25A Adjustable AC Dimmer is a high-power AC voltage regulator designed to control the brightness, speed, or temperature of AC appliances. Operating on AC 220V, it supports up to 2000W of load and 25A current, making it ideal for heater coils, light dimming, fan speed regulation, and AC motor control in DIY or industrial automation projects.
- The voltage is 50-220V.
- The current is 25A.
- Power is 2000W
- Its Size is 52*47*27mm/2*1.85*1in Operation
- Environment Temperature is between -20℃-40℃
-
30A Electronic Speed Controller ESC For Brushless BLDC Motors
Original price was: ₨ 1,200.₨ 1,000Current price is: ₨ 1,000.
The 30A Electronic Speed Controller (ESC) is a high-efficiency, compact speed controller for brushless BLDC motors, supporting 2S–4S LiPo batteries. Preloaded with SimonK or BLHeli firmware, it ensures ultra-fast throttle response, linear acceleration, and excellent motor synchronization. Ideal for DIY drones, RC planes, quadcopters, and robotic projects, this ESC includes a 5V/2A BEC, enabling direct power supply to flight controllers or servos.
-
3s Lipo Battery 11.1V 5200 maH 30C in Pakistan
Original price was: ₨ 9,000.₨ 8,000Current price is: ₨ 8,000.
The 3S LiPo Battery 11.1V 5200mAh 30C is a high-performance rechargeable power source designed for RC drones, cars, planes, boats, and robotics projects. With a 30C discharge rate, it delivers powerful and consistent output, ideal for demanding brushless motors and FPV systems. Built with premium-grade cells, it offers long cycle life, balanced charging, and reliable XT60 or Deans plug output.
- The battery capacity is 5200 mah.
- The battery discharge time is 30C.
- Its parameters are 11.1V 5200mah and 30C.
- This Battery consists of 3s.
- Battery size is 146 x 49 x 29 mm.
- Battery weight is almost 432g.
- It has XT60 plug
-
4 Channel Solid State Relay Module
Original price was: ₨ 1,500.₨ 1,050Current price is: ₨ 1,050.
4 Channel 5V solid state relay 240V 2A:
- Size:71*62mm*24mm
- Power supply: 5V DC(160mA)
Input control signal voltage:
- (0-0.5V low stage SSR is OFF)
- (2.5-20V high stage SSR is ON)
SSR Output (each channel):
- Load voltage range: 75 to 264VAC (50/60Hz).
- Load current: 0.1 to 2 AMP.
Power supply:
- 5VDC / 160mA (all channel ON).
-
400 Holes Solderless Breadboard Bread Board MB102
Original price was: ₨ 180.₨ 140Current price is: ₨ 140.
The MB102 400-point solderless breadboard is ideal for prototyping medium-scale circuits. Compatible with Arduino, Raspberry Pi, NodeMCU, and other microcontrollers.
-
Tie Points: 400
-
Dimensions: 8.2 x 5.5 x 0.85 cm
-
Material: ABS plastic, nickel-plated contacts
-
Self-Adhesive Backing: Yes
-
Interlocking Design: Yes
-
-
5 Channel Tcrt5000 IR Array Tracking Sensor Module
Original price was: ₨ 550.₨ 480Current price is: ₨ 480.
The 5-Channel TCRT5000 IR Sensor Module is perfect for line-following robots, DIY robotics, and Arduino automation projects. Operating at 3.3–5V, it offers five high-sensitivity IR sensors for accurate black/white line detection. With quick response time, stable performance, and compatibility with Arduino and microcontrollers, it’s ideal for obstacle avoidance, path tracking, and embedded projects.
-
5000mah 3.7v Lithium Ion Battery
Original price was: ₨ 1,000.₨ 750Current price is: ₨ 750.
High-capacity 5000mAh 3.7V Lithium-Ion Rechargeable Battery. Ideal for Arduino, IoT devices, robotics, and portable electronics with efficient energy density.
-
Capacity: 5000mAh
-
Voltage: 3.7V DC
-
Battery Type: Li-ion (Lithium-Ion)
-
Rechargeable: Yes
-
Protection Circuit: Optional (check product variant)
-
Output Leads: Bare wire or JST connector
-
-
5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module
Original price was: ₨ 400.₨ 330Current price is: ₨ 330.
- (0-2.5V state low relay OFF)
- (3.3-5V state high relay ON)
- Module interface:
- Input section:
- DC +: positive power supply (by relay voltage power supply)
- DC-: connect power negative
- CH: Relay module signal to trigger the end (high level trigger effective)
-
5V 1-Channel Relay Module
Original price was: ₨ 200.₨ 150Current price is: ₨ 150.
The 5V 1-Channel Relay Module allows microcontrollers like Arduino and Raspberry Pi to control high-voltage AC or DC devices with a low-level trigger input. Capable of switching up to 10A at 250V AC or 30V DC, it’s perfect for applications in smart home automation, DIY electronics, and IoT projects. Compact design with screw terminals and onboard LED indicators for real-time status feedback.
