-
5 Channel Tcrt5000 IR Array Tracking Sensor Module
Original price was: ₨ 550.₨ 480Current price is: ₨ 480.
The 5-Channel TCRT5000 IR Sensor Module is perfect for line-following robots, DIY robotics, and Arduino automation projects. Operating at 3.3–5V, it offers five high-sensitivity IR sensors for accurate black/white line detection. With quick response time, stable performance, and compatibility with Arduino and microcontrollers, it’s ideal for obstacle avoidance, path tracking, and embedded projects.
-
5 Channel TCRT5000 Line Following Line Tracking Array Module
Original price was: ₨ 600.₨ 500Current price is: ₨ 500.
The 5 Channel TCRT5000 IR Line Tracking Module is a powerful tool for robotics and automation. It operates on 3.3V–5V, supports 2–12mm detection range, and features fast response time for accurate black-and-white line recognition. Perfect for Arduino, DIY line-following robots, AGVs, and maze-solving applications. Ideal for STEM projects and real-time robotic navigation.
-
5mm Light Dependent Resistor LDR Sensor
Original price was: ₨ 50.₨ 10Current price is: ₨ 10.
This 5mm Light Dependent Resistor (LDR) sensor detects light intensity and is ideal for smart lighting, Arduino, and IoT automation. Operating voltage: 3.3V–5V, response time <20ms, compact and easy to use in light-sensing circuits.
-
5V Laser Detector Sensor High-Level Laser Receiver
Original price was: ₨ 300.₨ 200Current price is: ₨ 200.
-
This 5V Laser Detector Sensor Module features a high-level laser receiver that detects laser signals with precision. Operating voltage: 3.3V–5V, ideal for Arduino, IoT, and automation projects. With fast response time and excellent accuracy, it’s perfect for laser-based object detection and signal tracking in DIY electronics, line follower robots, and laser communication systems.
-
-
AM2302 Temperature and Humidity Sensor
Original price was: ₨ 1,100.₨ 900Current price is: ₨ 900.
- AM2302 (Wired DHT22) Temperature and Humidity Sensor operating voltage 3 to 5 volts DC.
- Its maximum current consumption is approximately 2.5mA during a data request.
- The user is able to get new data once every 2 seconds.
- it provides output as a digital single bus.
- Its air humidity measuring range is 0 to 100%.
- 0 to 80 degrees centigrade is its temperature measuring range.
- Its air humidity tolerance range is 2 to 5%.
-
Automatic Light Control Sun Switch LDR (220V 10A)
Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
Automate lighting with this 220V LDR Sun Switch. Supports up to 10A load, ideal for outdoor lights, security systems, and smart home automation. Turns lights ON at dusk and OFF at dawn using light-sensing technology. Weatherproof and perfect for DIY and IoT projects.
-
DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor
Original price was: ₨ 800.₨ 700Current price is: ₨ 700.
The MAX6675 Module with K-Type Thermocouple is a high-precision digital temperature sensor designed for accurate high-temperature measurements. Featuring a wide temperature range (0°C to 1024°C), digital SPI communication, and cold junction compensation, this module is ideal for Arduino, industrial automation, IoT applications, HVAC systems, kilns, and scientific research.
-
DHT11 Temperature Humidity Sensor Module for Arduino
Original price was: ₨ 300.₨ 200Current price is: ₨ 200.
The DHT11 is a digital temperature and humidity sensor. DHT11 sensor has a built-in NTC thermistor to measure humidity and a capacitive humidity sensor to measure temperature.Digital temperature and humidity sensor DHT11 is a low-cost, easy-to-use sensor that is commonly used in a variety of applications. DHT11 sensor has a single data pin that is used to communicate with the host microcontroller. The sensor uses a one-wire protocol, which makes it easy to interface with the microcontroller. DHT11 sensor can be read by the microcontroller using a simple polling method.The DHT11 sensor has a temperature range of 0°C to 50°C and a humidity range of 20% to 90%. The sensor has an accuracy of ±2°C and ±5%RH. The DHT11 sensor is a reliable and accurate sensor that is a good choice for many applications.It is important to note that the DHT11 not designed to be powered by a higher voltage than 5.5V, as this could damage the sensor. The DHT11 is a digital temperature and humidity sensor that can power by a voltage range of 3.3V to 5.5V. The recommended input voltage for the DHT11 is 5V.The DHT11 has a maximum current draw of 2.5mA, which is relatively low. This means that the DHT11 can power by a small battery or a USB power supply. The DHT11 has a data pin that used to communicate with the host microcontroller. The data pin pulled up to 5V by a 10K resistor. This means that the microcontroller can read the data from the DHT11 without having to provide any additional power to the sensor. -
DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor
Original price was: ₨ 1,000.₨ 900Current price is: ₨ 900.
The DHT21/AM2301 is a high-precision capacitive digital temperature and humidity sensor operating at 3.3V–5.5V. It offers a wide temperature range of -40°C to 80°C and 0–100% RH with ±0.5°C and ±3% RH accuracy. Ideal for Arduino, IoT, weather monitoring, and smart home automation projects.
-
DHT22 Digital Temperature and Humidity Sensor Module
Original price was: ₨ 1,000.₨ 550Current price is: ₨ 550.
The DHT22 is a high-precision digital temperature and humidity sensor module ideal for Arduino, Raspberry Pi, ESP8266, IoT systems, smart homes, and weather stations. With stable output, wide range, and digital signal interface, it’s perfect for climate monitoring, automation, and data logging projects.
-
DHT22 Humidity and Temperature Sensor
Original price was: ₨ 800.₨ 650Current price is: ₨ 650.
The DHT22 Temperature & Humidity Sensor is a high-precision digital sensor ideal for Arduino, Raspberry Pi, IoT, HVAC, and weather monitoring systems. It offers accurate temperature and humidity readings, making it perfect for environmental monitoring and smart home automation.
-
DS18B20 Temperature Sensor Module
Original price was: ₨ 300.₨ 230Current price is: ₨ 230.
DS18B20 Temperature Sensor Module is a digital temperature sensor, and you can easily connect it to Arduino with only one 4.7-pound resistor, base 1 – Ground 2 – Output – Base 3 to the positive of the source, with resistance to base 2 Is connected. The connection of this sensor to the Arduino via the 1-wire protocol is established. Therefore, several sensors can be connected only through one common wire to Arduino. The output is digitally accurate to 12 bits. Therefore, the temperature can be measured with a precision of 0.0625 º C.
