-
NodeMCU V2 Lua Wifi Iot Development Board Esp 12E Esp8266
Original price was: ₨ 900.₨ 700Current price is: ₨ 700.
The NodeMCU V2 ESP8266 ESP-12E WiFi Development Board is a compact and efficient microcontroller platform ideal for IoT, home automation, and STEM-based electronics. Powered by the ESP8266 SoC, it supports 3.3V logic level, comes with USB to serial converter (CP2102), and offers seamless WiFi connectivity, GPIO, PWM, I2C, and UART. Perfect for Arduino, Lua scripting, and web-based applications.
-
NodeMcu Wroom Esp32 Wifi Based Microcontroller Development Board
Original price was: ₨ 1,200.₨ 900Current price is: ₨ 900.
- Current receiving 80mA.
- the voltage supply is 2.2V to 3.6V.
- current transmitting is 80mA.
- The number of pins supported is 30.
- The data rate is 54Mbps.
- The frequency is 2.4GHz.
- Surface mount type.
- operating temperature is -40 to 85 degrees centigrade.
- power output is 16.5dBm.
- Integrated 520Kb SRAM.
- Ultra-low-power management.
- 4 Mb flash.
- On-board PCB antenna.
-
Photocell Street Light Sun Switch Sensor 12V
Original price was: ₨ 500.₨ 380Current price is: ₨ 380.
Upgrade outdoor automation with this 12V Photocell Sun Switch Sensor. Ideal for smart street lighting and solar projects. Operating voltage: 12V DC, load: up to 10A. Automatically turns lights ON at dusk and OFF at dawn—perfect for Arduino, IoT, and DIY lighting setups.
-
Pre Soldered Arduino Nano V3.0 With Cable in Pakistan
Original price was: ₨ 950.₨ 800Current price is: ₨ 800.
The Pre-Soldered Arduino Nano V3.0 (with USB Cable) is a compact, breadboard-friendly microcontroller based on the ATmega328P. Ideal for robotics and IoT.
-
Microcontroller: ATmega328P
-
USB Interface: Mini USB (Cable Included)
-
I/O Pins: 22 (14 Digital, 8 Analog)
-
Board Type: Nano V3.0 with pre-soldered headers
-
-
Pre Soldered ESP32 S3 WROOM 1 Development Board 2.4G Wifi BT Module BLE5.0
Original price was: ₨ 2,000.₨ 1,650Current price is: ₨ 1,650.
The ESP32-S3 WROOM-1 Pre-Soldered Development Board is a powerful WiFi + Bluetooth 5.0 BLE dual-core microcontroller designed for high-performance IoT, AI, and embedded projects. Featuring 2.4GHz WiFi, USB support, pre-soldered headers, and support for Arduino, MicroPython, and ESP-IDF, it’s ideal for smart devices, robotics, and wireless applications.
-
Operating Voltage: 3.3V
-
Dual-core 240MHz Tensilica LX7 CPU
-
Built-in 512KB SRAM, 384KB ROM
-
USB OTG, ADCs, GPIOs, PWM support
-
-
QTR-8RC Line Following Sensor
Original price was: ₨ 600.₨ 500Current price is: ₨ 500.
The QTR-8RC Line Following Sensor is an 8-channel array designed for detecting black lines on a white surface, making it perfect for line-following robots. It operates at 3.3V to 5V, with a fast response time and high precision, enabling precise line tracking and navigation. This sensor is ideal for educational robotics, STEM projects, and DIY robotic applications.
-
Relay Module 5V 2-Channel Low Level Trigger
Original price was: ₨ 250.₨ 200Current price is: ₨ 200.
The 5V 2-Channel Relay Module (Low-Level Trigger) enables reliable control of high-voltage devices using low-voltage digital signals. With each relay supporting up to 10A at 250V AC or 30V DC, this module is ideal for use with Arduino, Raspberry Pi, and other microcontrollers in home automation, robotics, industrial control, and IoT systems. Screw terminal outputs make wiring easy, while onboard indicator LEDs ensure status visibility.
-
Sharp IR 2Y0A02 Long Range Sensor
Original price was: ₨ 1,500.₨ 1,250Current price is: ₨ 1,250.
The Sharp IR 2Y0A02 Long Range Sensor is a high-precision infrared distance sensor that can measure distances between 20cm to 150cm with an accuracy of ±3%. Operates at 5V with easy integration into robotics, Arduino projects, and automated systems. Ideal for obstacle detection and distance measurement applications.
-
Sim800L GSM Module with Micro Sim Card
Original price was: ₨ 1,500.₨ 1,350Current price is: ₨ 1,350.
The SIM800L GSM Module is a compact and powerful communication board that enables SMS, voice calls, and GPRS data via a Micro SIM card. Operating at 3.7V to 4.2V, it works seamlessly with Arduino, ESP8266, and Raspberry Pi, and supports standard AT commands for easy integration in IoT, remote sensing, and automation projects. Onboard LED indicators and antenna pad for signal stability.
-
SIM900A GSM GPRS Wireless Extension Module Board With Antenna
Original price was: ₨ 2,500.₨ 2,350Current price is: ₨ 2,350.
The SIM900A GSM GPRS Module is a compact wireless communication board that enables SMS, calling, and GPRS internet connectivity for microcontroller platforms like Arduino, ESP32, and Raspberry Pi. Operating at 5V–12V DC, it supports standard AT commands and includes an external antenna for enhanced signal reception. Ideal for IoT, remote monitoring, and wireless control projects.
-
Solid State Relay SSR Module 2 Channel For Arduino
Original price was: ₨ 600.₨ 500Current price is: ₨ 500.
The 2-Channel Solid State Relay (SSR) Module is a high-performance switching device designed for fast, noise-free, and reliable AC load control. It operates silently with no mechanical wear, making it ideal for home automation, industrial applications, and microcontroller-based projects. Compatible with Arduino, Raspberry Pi, and other controllers, it ensures safe and efficient switching of electrical devices.
-
TCRT5000 Line Following Robot Sensor Module
Original price was: ₨ 200.₨ 120Current price is: ₨ 120.
The TCRT5000 Line Following Sensor Module uses infrared light to detect lines on surfaces, perfect for robotics and Arduino projects. Operating at 5V with high precision, this sensor detects black lines on white backgrounds for line following robots and automated systems. Easy to integrate into DIY projects, it offers stable and reliable performance.
