-
Bluetooth Module HC05
Original price was: ₨ 650.₨ 600Current price is: ₨ 600.
The HC-05 Bluetooth Module is a flexible UART-based wireless transceiver supporting both master and slave modes. Ideal for Arduino, ESP32, and other microcontroller-based systems, it operates at 3.3V logic, supports configurable baud rates, and provides reliable Bluetooth SPP (Serial Port Profile) communication for robotics, IoT, and home automation applications.
-
D1-Mini WIFI Development Board
Original price was: ₨ 750.₨ 600Current price is: ₨ 600.
The D1 Mini WiFi Development Board is a compact, ESP8266-based microcontroller perfect for IoT, automation, and smart projects. It features built-in WiFi 802.11 b/g/n, operates at 3.3V, and is powered via Micro-USB (5V input). With 11 digital I/O pins, analog input, and full support for Arduino IDE, it’s ideal for wireless control systems, home automation, and sensor-based projects.
Small in size but big in performance, it supports OTA (Over-the-Air) programming, and is fully compatible with NodeMCU, MicroPython, and other open-source platforms.
-
DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor
Original price was: ₨ 800.₨ 700Current price is: ₨ 700.
The MAX6675 Module with K-Type Thermocouple is a high-precision digital temperature sensor designed for accurate high-temperature measurements. Featuring a wide temperature range (0°C to 1024°C), digital SPI communication, and cold junction compensation, this module is ideal for Arduino, industrial automation, IoT applications, HVAC systems, kilns, and scientific research.
-
DHT11 Temperature Humidity Sensor Module for Arduino
Original price was: ₨ 300.₨ 200Current price is: ₨ 200.
The DHT11 is a digital temperature and humidity sensor. DHT11 sensor has a built-in NTC thermistor to measure humidity and a capacitive humidity sensor to measure temperature.Digital temperature and humidity sensor DHT11 is a low-cost, easy-to-use sensor that is commonly used in a variety of applications. DHT11 sensor has a single data pin that is used to communicate with the host microcontroller. The sensor uses a one-wire protocol, which makes it easy to interface with the microcontroller. DHT11 sensor can be read by the microcontroller using a simple polling method.The DHT11 sensor has a temperature range of 0°C to 50°C and a humidity range of 20% to 90%. The sensor has an accuracy of ±2°C and ±5%RH. The DHT11 sensor is a reliable and accurate sensor that is a good choice for many applications.It is important to note that the DHT11 not designed to be powered by a higher voltage than 5.5V, as this could damage the sensor. The DHT11 is a digital temperature and humidity sensor that can power by a voltage range of 3.3V to 5.5V. The recommended input voltage for the DHT11 is 5V.The DHT11 has a maximum current draw of 2.5mA, which is relatively low. This means that the DHT11 can power by a small battery or a USB power supply. The DHT11 has a data pin that used to communicate with the host microcontroller. The data pin pulled up to 5V by a 10K resistor. This means that the microcontroller can read the data from the DHT11 without having to provide any additional power to the sensor. -
DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor
Original price was: ₨ 1,000.₨ 900Current price is: ₨ 900.
The DHT21/AM2301 is a high-precision capacitive digital temperature and humidity sensor operating at 3.3V–5.5V. It offers a wide temperature range of -40°C to 80°C and 0–100% RH with ±0.5°C and ±3% RH accuracy. Ideal for Arduino, IoT, weather monitoring, and smart home automation projects.
-
DHT22 Digital Temperature and Humidity Sensor Module
Original price was: ₨ 1,000.₨ 550Current price is: ₨ 550.
The DHT22 is a high-precision digital temperature and humidity sensor module ideal for Arduino, Raspberry Pi, ESP8266, IoT systems, smart homes, and weather stations. With stable output, wide range, and digital signal interface, it’s perfect for climate monitoring, automation, and data logging projects.
-
DHT22 Humidity and Temperature Sensor
Original price was: ₨ 800.₨ 650Current price is: ₨ 650.
The DHT22 Temperature & Humidity Sensor is a high-precision digital sensor ideal for Arduino, Raspberry Pi, IoT, HVAC, and weather monitoring systems. It offers accurate temperature and humidity readings, making it perfect for environmental monitoring and smart home automation.
-
DS18B20 Temperature Sensor Module
Original price was: ₨ 300.₨ 230Current price is: ₨ 230.
DS18B20 Temperature Sensor Module is a digital temperature sensor, and you can easily connect it to Arduino with only one 4.7-pound resistor, base 1 – Ground 2 – Output – Base 3 to the positive of the source, with resistance to base 2 Is connected. The connection of this sensor to the Arduino via the 1-wire protocol is established. Therefore, several sensors can be connected only through one common wire to Arduino. The output is digitally accurate to 12 bits. Therefore, the temperature can be measured with a precision of 0.0625 º C.
-
DS18B20 Waterproof Temperature Sensor
Original price was: ₨ 300.₨ 250Current price is: ₨ 250.
The DS18B20 Waterproof Temperature Sensor is a high-precision digital sensor with a stainless steel probe. Ideal for Arduino, Raspberry Pi, HVAC, industrial automation, and temperature monitoring, it provides accurate, real-time temperature readings in liquids, soil, and harsh environments.
-
ESP Wroom 32 Development Board Module 38 Pin
Original price was: ₨ 1,500.₨ 1,170Current price is: ₨ 1,170.
ESP Wroom 32 38 Pin Development Board is a powerful and compact module featuring dual-core Tensilica LX6 MCU, integrated 2.4GHz WiFi and Bluetooth (BLE). With a wide input voltage range (5–12V) and 38 GPIO pins, it supports PWM, ADC, I2C, UART, and SPI, making it ideal for IoT projects, wireless communication, and Arduino-compatible development.
-
ESP32 38-Pin Development Board WiFi + Bluetooth
Original price was: ₨ 1,200.₨ 1,050Current price is: ₨ 1,050.
The ESP32 38-Pin Development Board features a dual-core 240MHz processor, integrated WiFi & Bluetooth (BLE 4.2), and 38 GPIO pins supporting PWM, ADC, SPI, I2C, UART, and more. Ideal for IoT development, home automation, wireless communication, and Arduino-compatible embedded systems.
-
ESP32 Cam WiFi and Bluetooth OV2640 Board
Original price was: ₨ 2,000.₨ 1,450Current price is: ₨ 1,450.
ESP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
