-
₨ 750 Original price was: ₨ 750.₨ 600Current price is: ₨ 600.
- It contains 11 digital input/output pins.
- These all pins have interrupt/ PWM/ I2C/ one-wire (except D0).
- It has an analog input pin of 3.2V.
- It has a Micro USB connection.
- This WIFI board uses BRT (Bias Resistor Transistor).
- This board is easier in flash mode.
-
₨ 1,200 Original price was: ₨ 1,200.₨ 1,050Current price is: ₨ 1,050.
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller. The ESP32 is integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance, and RF performance is the best, safe and reliable, easy to extend to a variety of applications.
-
₨ 200 Original price was: ₨ 200.₨ 140Current price is: ₨ 140.
ESP8266 1S Breakout Adapter
A compact adapter board designed for the ESP8266-01 module, providing easy connections for power and I/O pins. Ideal for WiFi-based IoT projects, prototyping, and seamless integration with microcontrollers like Arduino.
-
₨ 800 Original price was: ₨ 800.₨ 600Current price is: ₨ 600.
- It uses CH340G instead of CP2102.
- It is a wireless 802.11 b/g/n standard.
- Its WiFi speed is 2.4GHz.
- It supports WPA/ WPA2 security mode.
- It supports STA/AP/STA + AP three operating modes.
- It has a built-in TCP/IP protocol stack to support multiple TCP Client connections. It has a maximum of 5 connections.
- It supports UART /GPIO data communication interface.
- It has remote firmware upgrade (OTA)
- It supports smart link smart networking.
- Users don’t need to download resetting.
- It has a great set of tools to develop ESP8266
- It is the lowest cost of WiFi.
- It is for Arduino like input-output hardware.
- This CH340G greatly speeds up the IoT application developing process.
- It is open-source, interactive, programmable, low cost, simple, smart, and WiFi-enabled.
- It has WiFi MCU ESP8266 integrated and it is easy to the prototyping development kit.
- This low-cost wifi module has built-in USB to TTL serial with super reliable industrial strength.
- It has advanced API for hardware IO.
- It also has Event-driven API for network applications.
-
₨ 400 Original price was: ₨ 400.₨ 340Current price is: ₨ 340.
- Its Wifi range is 802.11 b/g/n
- Its WIFi direct (P2P), soft-AP.
- It is an integrated TCP/IP protocol stack.
- It is an integrated TR switch, balun, LNA, power amplifier, and matching network.
- It is integrated PLLs, regulators, DCXO, and power management units.
- There is +19.5dBm output power in 802.11b mode.
- It has a power-down leakage current of <10uA.
-
₨ 400 Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
Features:
This module requires a 3.3 volt supply for VCC, and 3.3V logic.
Connecting RX or TX on 5V Arduino will destroy this module.
You must use a logic level converter, or a 3.3V Arduino.
The 3.3V supply on the Arduino Uno has inadequate current capability to power this module.
You must provide a separate, higher 3.3V supply(about 300mA or better).
-
₨ 400 Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.
-
₨ 7,000 Original price was: ₨ 7,000.₨ 6,500Current price is: ₨ 6,500.
TTGO T-Call V1.4 ESP32 SIM800L GSM Module
Transform your projects with the TTGO T-Call V1.4, a powerful ESP32-based GSM module that combines robust connectivity and versatile functionality. Ideal for IoT applications, this module integrates a SIM800L GSM/GPRS module with the ESP32 microcontroller, enabling seamless communication and data transfer.
-
₨ 900 Original price was: ₨ 900.₨ 700Current price is: ₨ 700.
- 11 b/g/n Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Use CH340G replace the CP2102.
- Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled
- Arduino-like hardware IO
- Integrated low power 32-bit CPU
-
₨ 1,200 Original price was: ₨ 1,200.₨ 900Current price is: ₨ 900.
- Current receiving 80mA.
- the voltage supply is 2.2V to 3.6V.
- current transmitting is 80mA.
- The number of pins supported is 30.
- The data rate is 54Mbps.
- The frequency is 2.4GHz.
- Surface mount type.
- operating temperature is -40 to 85 degrees centigrade.
- power output is 16.5dBm.
- Integrated 520Kb SRAM.
- Ultra-low-power management.
- 4 Mb flash.
- On-board PCB antenna.
-
₨ 300 Original price was: ₨ 300.₨ 240Current price is: ₨ 240.
Key Features:
- CH340 chip for reliable connection
- Stable performance and compatibility
- 1000uF solid-state capacitors for power supply
- Compact size (34.5 x 17.2mm)
- Easy to use and install
Applications:
- ESP8266 module development and debugging
- IoT projects
- Home automation
- Robotics