-
ESP8266 1S Breakout Adapter in Pakistan
Original price was: ₨ 200.₨ 140Current price is: ₨ 140.
The ESP8266 1S Breakout Adapter is designed to simplify the development and testing of ESP-01/ESP-01S WiFi modules. It features an 8-pin header, 2.54mm standard pitch, and clearly labeled pins (TX, RX, GND, VCC, etc.), making it easy to integrate with Arduino, ESP8266, and NodeMCU platforms. Ideal for IoT projects, DIY smart devices, and embedded systems development. Provides reliable connections and eliminates complex wiring.
-
ESP8266 WiFi ESP-01 Serial Module
Original price was: ₨ 400.₨ 340Current price is: ₨ 340.
The ESP8266 WiFi ESP-01 Module is a compact, affordable, and highly efficient wireless communication module, ideal for IoT, home automation, and Arduino applications. It operates at 3.3V, uses the ESP8266EX SoC, and offers 802.11 b/g/n WiFi connectivity. With 2 GPIOs, UART interface, and low-power operation, the ESP-01 is perfect for integrating WiFi into smart devices, sensors, and embedded systems. Compatible with NodeMCU, ESPHome, and MicroPython platforms.
-
ESP8266-12E WiFi Module
Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
The ESP8266-12E WiFi Module is a powerful and compact wireless transceiver, ideal for IoT and automation projects. Powered by the ESP8266EX SoC, it features 2MB external flash memory, enhanced PCB antenna, and full support for 802.11 b/g/n WiFi protocols. With 16 GPIOs, UART/SPI/I2C interfaces, and low power consumption, this module integrates smoothly into Arduino, ESPHome, and NodeMCU projects. A robust choice for smart systems, wireless controllers, and cloud-based automation.
-
ESP8266EX ESP8266-12F WiFi Module.
Original price was: ₨ 400.₨ 300Current price is: ₨ 300.
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.
-
Force Sensitive Resistor FSR 0.6 inch
Original price was: ₨ 2,500.₨ 1,400Current price is: ₨ 1,400.
The Force Sensitive Resistor (FSR) 0.6 inch is a thin, flexible pressure sensor that changes its resistance based on applied force or pressure. It provides analog output and works efficiently with Arduino, Raspberry Pi, and other microcontrollers. Ideal for touch detection, weight measurement, and robotic control systems.
-
GPS Mount for APM NEO M8N 7M 6M Modules Stand Foldable in Pakistan
Original price was: ₨ 950.₨ 800Current price is: ₨ 800.
The Foldable GPS Mount for APM NEO M8N is a lightweight, high-strength GPS holder specifically designed for APM and Pixhawk flight controllers. It ensures optimal GPS positioning and reliable compass orientation by elevating the GPS module away from sources of interference. Featuring a foldable arm, secure base, and easy installation, this mount is perfect for DIY drone enthusiasts and FPV builders who demand precision and convenience.
-
GPS Neo-6m Satellite Positioning Module Development Board NEO-6M
Original price was: ₨ 2,000.₨ 1,550Current price is: ₨ 1,550.
The NEO-6M GPS Module is a high-performance satellite positioning unit based on u-blox’s NEO-6M chipset. It supports real-time location tracking with 50 channels, baud rate 9600bps, and is compatible with Arduino, Raspberry Pi, ESP8266, and ESP32. With a built-in EEPROM and external active antenna, it ensures accurate GPS data for navigation, tracking, and IoT applications.
-
Gravity Analog Turbidity Sensor
Original price was: ₨ 3,500.₨ 2,200Current price is: ₨ 2,200.
The Gravity Analog Turbidity Sensor is designed to measure the cloudiness or haziness of a liquid. It detects suspended particles in water using optical sensing technology and outputs an analog signal proportional to turbidity levels. Ideal for Arduino, Raspberry Pi, and IoT water quality monitoring systems.
-
Gravity Magnetic Induction Sensor
Original price was: ₨ 1,000.₨ 500Current price is: ₨ 500.
The Gravity Magnetic Induction Sensor detects magnetic fields and converts them into digital signals for easy integration with microcontrollers like Arduino, Raspberry Pi, and ESP32. It is highly sensitive, stable, and ideal for magnetic field detection, proximity sensing, and automation applications.
-
GSM Module TTGO T-Call V1.4 ESP32 SIM800L
Original price was: ₨ 7,000.₨ 6,500Current price is: ₨ 6,500.
TTGO T-Call V1.4 ESP32 SIM800L GSM Module
Transform your projects with the TTGO T-Call V1.4, a powerful ESP32-based GSM module that combines robust connectivity and versatile functionality. Ideal for IoT applications, this module integrates a SIM800L GSM/GPRS module with the ESP32 microcontroller, enabling seamless communication and data transfer.
-
GY-271 HMC5883L Triple Axis Compass Magnetometer Sensor Module
Original price was: ₨ 650.₨ 500Current price is: ₨ 500.
The GY-271 HMC5883L Triple Axis Magnetometer Compass Sensor Module is a 3-axis digital compass designed for accurate magnetic field measurement and orientation detection. Ideal for Arduino, Raspberry Pi, and ESP32 navigation, drone, and robotic applications.
-
GY-271 QMC5883L Triple Axis Compass Magnetometer Sensor Module
Original price was: ₨ 2,500.₨ 1,000Current price is: ₨ 1,000.
The GY-271 QMC5883L Triple Axis Compass Magnetometer Sensor Module is a 3-axis digital magnetic sensor ideal for orientation detection, navigation, and heading reference in Arduino, Raspberry Pi, and ESP32 projects. Designed for high accuracy and stability, it’s widely used in drones, robots, and motion tracking applications.
