Advanced Pixhawk PX4 2.4.8 Flight Controller for FPV drones and quadcopters. Compatible with PX4/ArduPilot, featuring 32-bit STM32F4 MCU, multiple I/O ports, and real-time flight stability.
MCU: STM32F427 32-bit ARM Cortex M4
Gyroscope/Accelerometer: MPU6000 (SPI)
Barometer: MS5611
Compass: External (included with GPS)
Firmware: ArduPilot or PX4 compatible
Connectivity: I2C, CAN, UART, USB, PWM
The Flysky FS-i6 2.4GHz 6CH RC Transmitter with FS-iA6 Receiver is a professional-grade radio system using AFHDS 2A technology for ultra-reliable, interference-resistant control. It features 6 programmable channels, digital trims, and 20 model memory, making it ideal for RC helicopters, quadcopters, gliders, airplanes, and drones. The included FS-iA6 receiver supports both PWM and PPM outputs, ensuring clean signal processing and compatibility with modern flight controllers.
The Flysky FS-i6X 2.4GHz 6CH RC Transmitter with FS-iA10B 10CH Receiver is a high-performance radio control system based on AFHDS 2A (Automatic Frequency Hopping Digital System) technology. Designed for drones, fixed-wing aircraft, multirotors, RC boats, and robots, it supports 10 channels via PPM or iBus, telemetry feedback, multi-model memory (up to 20 models), and programmable mixing. With a crisp backlit LCD, ergonomic design, and compatibility with iBus telemetry and S.Bus receivers, it’s the perfect solution for professional and hobbyist RC users.
The Flysky FS-iA6B 6-Channel Receiver is a compact, full-range 2.4GHz AFHDS 2A digital receiver featuring iBus and PPM support for simplified wiring and fast communication. Fully compatible with Flysky i4, i6, i6X, i10 transmitters, it offers low-latency signal transmission, fail-safe protection, and dual antenna diversity for enhanced reception—perfect for FPV drones, RC planes, and multirotor applications.
The Foldable GPS Mount for APM NEO M8N is a lightweight, high-strength GPS holder specifically designed for APM and Pixhawk flight controllers. It ensures optimal GPS positioning and reliable compass orientation by elevating the GPS module away from sources of interference. Featuring a foldable arm, secure base, and easy installation, this mount is perfect for DIY drone enthusiasts and FPV builders who demand precision and convenience.
The iMax B3 Compact LiPo Battery Charger is a reliable and easy-to-use charger for 2S and 3S LiPo batteries. Designed for safety and efficiency, it features LED indicators for real-time charging status. Perfect for RC hobbyists looking for a compact and affordable charging solution.
The iMAX B6 Digital RC LiPo Battery Balance Charger is a professional-grade multifunction charger for RC and DIY enthusiasts. It supports LiPo, Li-ion, LiFe, NiMH, NiCd, and Pb batteries, offering precise voltage balancing, fast charging, and integrated safety protections. Equipped with an LCD display, XT60 input, and multi-mode charge/discharge support, it’s ideal for RC drones, FPV, Arduino robots, and battery maintenance.
The Multifunctional Landing Skid Kit for DJI F450/F550 offers durable, stable support for your drone during take-off and landing. Made from lightweight ABS plastic and aluminum alloy, this kit improves ground clearance, protects drone sensors and camera gimbals, and provides additional mounting options for FPV, GPS, or LED gear. Ideal for hobbyists upgrading DJI F450/F550 frames.
These are 10 inches 25.4cm 1045 Propellers for Quadcopter Fiber Optic Nylon Electric Propeller CCW For 2212 BRUSHLESS motors Engine RC Aircraft Parts Propeller For RC ABS 10X4.5E Direct Drive Propeller For RC Airplane Buy Dalprop Cyclone T1045 3-blade Propeller for RC Drone 2 Pairs at cheap price or Self-locking Propeller for Hornet SRC Quadcopter Drone Best-
These are the 1045 Propellers for Electric Flight by APC. Plastic propeller for RC airplane. 1045 Propeller For RC shape is constructed for direct drive applications. Propeller speeds are varied by changing the voltage supplied to the propeller’s motor, a process that is handled by an Electronic Speed Controller (ESC). Get all types of sensors, modules, drone frames, and motors from Pakistan’s best online store electroway.org
High-performance O-XOXO 9450 Self-Tightening Propellers for DJI Phantom 3. Durable plastic construction, quick install, enhanced flight stability and thrust.
Model: O-XOXO 9450
Type: Self-tightening propellers (CW & CCW pair)
Material: Reinforced plastic with carbon fiber-like finish
Compatibility: DJI Phantom 3 / 2 series
Diameter × Pitch: 9.4 inches × 5.0 inches
Weight: ~13g per propeller
The RAMPS 1.4 Shield is a powerful 3D printer control board that interfaces an Arduino Mega 2560 with stepper drivers and other components. It supports up to 5 stepper motor drivers and features plug-and-play compatibility with LCD modules, heated beds, extruders, and more. Designed for Prusa Mendel, RepRap, and custom 3D printers.
Compact and efficient 3.7V 1000mAh Li-Po Rechargeable Battery ideal for embedded systems, IoT modules, drones, wearable electronics, and Arduino projects.
Battery Type: Lithium-Polymer (Li-Po)
Nominal Voltage: 3.7V DC
Capacity: 1000mAh
Connector: JST or bare wire
Rechargeable: Yes
Applications: Ideal for portable electronics and prototyping
Notifications