The 5MP Raspberry Pi Camera Module V1.3 is a compact camera board designed specifically for Raspberry Pi single-board computers. It uses the OmniVision OV5647 image sensor capable of capturing high-resolution images and HD video. The module connects directly to the Raspberry Pi through the 15-pin CSI (Camera Serial Interface) using a ribbon cable, allowing high-speed data transfer. It is widely used for robot vision, surveillance systems, IoT monitoring, and computer vision projects.
The ESP32-CAM WiFi Bluetooth Development Board is a compact and powerful microcontroller module designed for IoT and smart camera applications. Built around the ESP32 chip, it integrates WiFi, Bluetooth, and an OV2640 camera module, enabling wireless image capture, video streaming, and embedded vision projects. With built-in microSD card support and multiple GPIO pins, the ESP32-CAM is ideal for security cameras, smart home systems, robotics, and Arduino-based IoT development.
The PAM8403 Digital Stereo Audio Amplifier Board is a compact and efficient Class-D audio amplification module capable of delivering up to 3W per channel for stereo sound output. Designed around the PAM8403 amplifier IC, this module operates on 5V DC power and provides high-quality audio amplification with low distortion and high efficiency. Its small size and simple interface make it ideal for portable speakers, DIY audio systems, Arduino projects, and embedded electronics applications.
The 5V 1A Power Bank Charging Circuit Module is a compact lithium battery charging and boost converter board designed to build DIY power banks and portable power supplies. It allows charging a 3.7V lithium battery and provides a regulated 5V output for powering electronic devices.
DIY 3D Spider Robot is a walking robot kit designed for students, makers, and robotics enthusiasts in Pakistan. Built with a 3D printed or acrylic frame and powered by 12 SG90 servo motors, this unassembled kit is ideal for Arduino-based robotics and STEM learning.
3D Printed Robotic Hand is a DIY unassembled robotics kit designed for students, makers, and engineers in Pakistan. Built with fine-quality 3D printed parts and high-torque servo motors, it is ideal for Arduino projects, STEM education, and robotics learning.
3D Printed Animatronic Eyes is an unassembled DIY kit designed for creating realistic eye movement using micro servo motors. This kit is ideal for animatronics, robotics, props, and educational projects that require expressive and lifelike eye motion.
The ZMCT103C 5A Single Phase AC Current Sensor Module is a compact, high-accuracy onboard module designed to measure AC currents up to 5A. It provides a stable conditioned analog output suitable for microcontrollers like Arduino, NodeMCU, ESP32, and industrial monitoring systems. Ideal for energy meters, load monitoring, over-current protection, and smart IoT applications.
APM 2.8 Multicopter Flight Controller is the new version of 2.5 and 2.6. it has built-in Compass for FPV RC Drone Aircraft flight controller. Here is the new option of Built-in Compas or external compass through a jumper. 2.8 Multicoper flight Controller is an open-source autopilot system. it is also the best selling product and it also won the Challenge UAV competition.
The Arduino UNO R3 is one of the most popular microcontroller boards used for learning electronics, programming, and robotics. It comes with a USB cable for easy connection to a computer, making it perfect for Arduino beginners, students, and DIY electronics projects.
The Pre-Soldered Arduino Nano V3.0 (with USB Cable) is a compact, breadboard-friendly microcontroller based on the ATmega328P. Ideal for robotics and IoT.
Microcontroller: ATmega328P
USB Interface: Mini USB (Cable Included)
I/O Pins: 22 (14 Digital, 8 Analog)
Board Type: Nano V3.0 with pre-soldered headers
The Arduino UNO R3 (Without USB Cable) is a widely-used microcontroller board based on the ATmega328P. It is ideal for electronics, robotics, and IoT projects.
Microcontroller: ATmega328P
Operating Voltage: 5V
Digital I/O Pins: 14 (6 PWM)
Analog Pins: 6
USB Interface: Type-B (Cable Not Included)
Board Type: UNO R3 (Original Design)
Arduino Nano V3.0 is a compact microcontroller board based on the ATmega328P. It features a mini-USB port, 22 I/O pins, and built-in voltage regulation, perfect for embedded projects.
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage: 7–12V
I/O Pins: 22 (14 Digital, 8 Analog)
USB Interface: Mini USB
Board Type: Nano V3.0 (Soldered Headers)
The Arduino Uno R3 SMD Board is based on the ATmega328P microcontroller with a surface-mount design for compactness and durability. A perfect fit for learners and developers working on electronics, robotics, and automation projects.
Microcontroller: ATmega328P (SMD)
Operating Voltage: 5V
I/O Pins: 14 Digital (6 PWM), 6 Analog
USB Interface: CH340G (USB Cable Not Included)
Board Type: Uno R3 SMD Edition
DIY 3D Spider Robot is a walking robot kit designed for students, makers, and robotics enthusiasts in Pakistan. Built with a 3D printed or acrylic frame and powered by 12 SG90 servo motors, this unassembled kit is ideal for Arduino-based robotics and STEM learning.
3D Printed Robotic Hand is a DIY unassembled robotics kit designed for students, makers, and engineers in Pakistan. Built with fine-quality 3D printed parts and high-torque servo motors, it is ideal for Arduino projects, STEM education, and robotics learning.
3D Printed Animatronic Eyes is an unassembled DIY kit designed for creating realistic eye movement using micro servo motors. This kit is ideal for animatronics, robotics, props, and educational projects that require expressive and lifelike eye motion.
The ZMCT103C 5A Single Phase AC Current Sensor Module is a compact, high-accuracy onboard module designed to measure AC currents up to 5A. It provides a stable conditioned analog output suitable for microcontrollers like Arduino, NodeMCU, ESP32, and industrial monitoring systems. Ideal for energy meters, load monitoring, over-current protection, and smart IoT applications.
Select at least 2 products
to compare