DIY 3D Spider Robot is a walking robot kit designed for students, makers, and robotics enthusiasts in Pakistan. Built with a 3D printed or acrylic frame and powered by 12 SG90 servo motors, this unassembled kit is ideal for Arduino-based robotics and STEM learning.
3D Printed Robotic Hand is a DIY unassembled robotics kit designed for students, makers, and engineers in Pakistan. Built with fine-quality 3D printed parts and high-torque servo motors, it is ideal for Arduino projects, STEM education, and robotics learning.
3D Printed Animatronic Eyes is an unassembled DIY kit designed for creating realistic eye movement using micro servo motors. This kit is ideal for animatronics, robotics, props, and educational projects that require expressive and lifelike eye motion.
The ZMCT103C 5A Single Phase AC Current Sensor Module is a compact, high-accuracy onboard module designed to measure AC currents up to 5A. It provides a stable conditioned analog output suitable for microcontrollers like Arduino, NodeMCU, ESP32, and industrial monitoring systems. Ideal for energy meters, load monitoring, over-current protection, and smart IoT applications.
The XM-18SW WiFi Intelligent Temperature & Humidity Controller is a multifunction digital environmental controller featuring WiFi remote app support, relay outputs, real-time monitoring, and high-precision sensors. Designed for incubators, greenhouses, livestock farming, HVAC systems, and smart automation projects.
The XHW1401 DC 12V Intelligent Digital Temperature Controller is a compact, high-accuracy thermostat module featuring a bright digital display, waterproof NTC sensor, and programmable heating/cooling modes. Ideal for incubators, aquariums, DIY electronics, and automatic temperature regulation systems.
The XH-W3002 Digital Temperature Controller (AC220V, 10A) is a compact, high-precision thermostat module designed for accurate heating and cooling control. It features a digital display, built-in relay output, waterproof NTC sensor probe, and programmable temperature thresholds for automation projects, incubators, aquariums, HVAC systems, and home appliances.
The CT60 Wireless PIR Motion Detector is a high-precision passive infrared sensor designed for reliable indoor security detection. It features long-range motion sensing, wireless RF transmission, anti-interference circuit design, and low-power consumption, making it ideal for smart home alarms, office security, and commercial monitoring systems.
APM 2.8 Multicopter Flight Controller is the new version of 2.5 and 2.6. it has built-in Compass for FPV RC Drone Aircraft flight controller. Here is the new option of Built-in Compas or external compass through a jumper. 2.8 Multicoper flight Controller is an open-source autopilot system. it is also the best selling product and it also won the Challenge UAV competition.
The Arduino UNO R3 with Cable is a powerful and beginner-friendly microcontroller board featuring the Atmega328 chip. It is widely used in electronics, robotics, IoT, and DIY projects. With 14 digital I/O pins, 6 analog inputs, and a USB interface, it allows seamless programming via the Arduino IDE. The board supports multiple sensors, modules, and shields, making it ideal for students, engineers, and hobbyists. Whether you’re working on home automation, smart devices, or embedded systems, the Arduino UNO R3 ensures reliable performance. Get started with coding, prototyping, and innovation today!
The Pre-Soldered Arduino Nano V3.0 (with USB Cable) is a compact, breadboard-friendly microcontroller based on the ATmega328P. Ideal for robotics and IoT.
Microcontroller: ATmega328P
USB Interface: Mini USB (Cable Included)
I/O Pins: 22 (14 Digital, 8 Analog)
Board Type: Nano V3.0 with pre-soldered headers
The Arduino UNO R3 (Without USB Cable) is a widely-used microcontroller board based on the ATmega328P. It is ideal for electronics, robotics, and IoT projects.
Microcontroller: ATmega328P
Operating Voltage: 5V
Digital I/O Pins: 14 (6 PWM)
Analog Pins: 6
USB Interface: Type-B (Cable Not Included)
Board Type: UNO R3 (Original Design)
Arduino Nano V3.0 is a compact microcontroller board based on the ATmega328P. It features a mini-USB port, 22 I/O pins, and built-in voltage regulation, perfect for embedded projects.
Microcontroller: ATmega328P
Operating Voltage: 5V
Input Voltage: 7–12V
I/O Pins: 22 (14 Digital, 8 Analog)
USB Interface: Mini USB
Board Type: Nano V3.0 (Soldered Headers)
The Arduino Uno R3 SMD Board is based on the ATmega328P microcontroller with a surface-mount design for compactness and durability. A perfect fit for learners and developers working on electronics, robotics, and automation projects.
Microcontroller: ATmega328P (SMD)
Operating Voltage: 5V
I/O Pins: 14 Digital (6 PWM), 6 Analog
USB Interface: CH340G (USB Cable Not Included)
Board Type: Uno R3 SMD Edition
DIY 3D Spider Robot is a walking robot kit designed for students, makers, and robotics enthusiasts in Pakistan. Built with a 3D printed or acrylic frame and powered by 12 SG90 servo motors, this unassembled kit is ideal for Arduino-based robotics and STEM learning.
3D Printed Robotic Hand is a DIY unassembled robotics kit designed for students, makers, and engineers in Pakistan. Built with fine-quality 3D printed parts and high-torque servo motors, it is ideal for Arduino projects, STEM education, and robotics learning.
3D Printed Animatronic Eyes is an unassembled DIY kit designed for creating realistic eye movement using micro servo motors. This kit is ideal for animatronics, robotics, props, and educational projects that require expressive and lifelike eye motion.
The ZMCT103C 5A Single Phase AC Current Sensor Module is a compact, high-accuracy onboard module designed to measure AC currents up to 5A. It provides a stable conditioned analog output suitable for microcontrollers like Arduino, NodeMCU, ESP32, and industrial monitoring systems. Ideal for energy meters, load monitoring, over-current protection, and smart IoT applications.
Select at least 2 products
to compare